Skip to main content

How to repeat or loop a Macro every X minutes in Excel?

While working with Microsoft Excel, you may need to create Macros to achieve some operations. For example, you want to create a Macro to automatically copy a range of data to a new place. As the data will be changed frequently, you need this Macro to automatically run every 5 minutes without manually triggering it in order to synchronize these two ranges of data. How to achieve it? Method in this article can help you.

Repeat or loop a Macro every X minutes in Excel


Repeat or loop a Macro every X minutes in Excel

The following VBA code can help you to repeat a Macro every X minutes in Excel. Please do as follows.

1. Press Alt + F11 keys at the same time to open the Microsoft Visual Basic for Applications window.

2. In the Microsoft Visual Basic for Applications window, please click Insert > Module. Then copy and paste the below VBA code into the Code window. See screenshot:

VBA code: Repeat or loop a Macro every X minutes in Excel

Sub ReRunMacro()
Dim xMin As String

'Insert your code here
    xMin = GetSetting(AppName:="Kutools", Section:="Macro", Key:="min", Default:="")
    If xMin = "Exit" Then
    SaveSetting "Kutools", "Macro", "min", "False"
    Exit Sub
    End If
    If (xMin = "") Or (xMin = "False") Then
      xMin = Application.InputBox(prompt:="Please input the interval time you need to repeat the Macro", Title:="Kutools for Excel", Type:=2)
      SaveSetting "Kutools", "Macro", "min", xMin
    End If
    If (xMin <> "") And (xMin <> "False") Then
      Application.OnTime Now() + TimeValue("0:" + xMin + ":0"), "ReRunMacro"
    Else
      Exit Sub
    End If
End Sub

Note: In the code, please replace this line ‘Insert your code here with the code you will run every X minutes.

3. Press the F5 key to run the code. In the popping up Kutools for Excel dialog box, please enter the interval time you will repeat the macro based on, and then click the OK button. See screenshot:

From now on, the certain Macro will run repeatedly every 5 minutes in your workbook.

Note: If you need to stop the execution of the macro and change the interval of the cycle, please copy the below VBA code into the same Module window and press the F5 key to run the code. Then the Macro will be stopped, please rerun the above code to specify a new interval.

VBA code: Stop the execution of the macro

Sub ExitReRunMacro()
SaveSetting "Kutools", "Macro", "min", "Exit"
End Sub

Office Tab - Tabbed Browsing, Editing, and Managing of Workbooks in Excel:

Office Tab brings the tabbed interface as seen in web browsers such as Google Chrome, Internet Explorer new versions and Firefox to Microsoft Excel. It will be a time-saving tool and irreplaceble in your work. See below demo:

Click for free trial of Office Tab!

Office Tab for Excel


Related articles:

Best Office Productivity Tools

🤖 Kutools AI Aide: Revolutionize data analysis based on: Intelligent Execution   |  Generate Code  |  Create Custom Formulas  |  Analyze Data and Generate Charts  |  Invoke Kutools Functions
Popular Features: Find, Highlight or Identify Duplicates   |  Delete Blank Rows   |  Combine Columns or Cells without Losing Data   |   Round without Formula ...
Super Lookup: Multiple Criteria VLookup    Multiple Value VLookup  |   VLookup Across Multiple Sheets   |   Fuzzy Lookup ....
Advanced Drop-down List: Quickly Create Drop Down List   |  Dependent Drop Down List   |  Multi-select Drop Down List ....
Column Manager: Add a Specific Number of Columns  |  Move Columns  |  Toggle Visibility Status of Hidden Columns  |  Compare Ranges & Columns ...
Featured Features: Grid Focus   |  Design View   |   Big Formula Bar    Workbook & Sheet Manager   |  Resource Library (Auto Text)   |  Date Picker   |  Combine Worksheets   |  Encrypt/Decrypt Cells    Send Emails by List   |  Super Filter   |   Special Filter (filter bold/italic/strikethrough...) ...
Top 15 Toolsets12 Text Tools (Add Text, Remove Characters, ...)   |   50+ Chart Types (Gantt Chart, ...)   |   40+ Practical Formulas (Calculate age based on birthday, ...)   |   19 Insertion Tools (Insert QR Code, Insert Picture from Path, ...)   |   12 Conversion Tools (Numbers to Words, Currency Conversion, ...)   |   7 Merge & Split Tools (Advanced Combine Rows, Split Cells, ...)   |   ... and more

Supercharge Your Excel Skills with Kutools for Excel, and Experience Efficiency Like Never Before. Kutools for Excel Offers Over 300 Advanced Features to Boost Productivity and Save Time.  Click Here to Get The Feature You Need The Most...

Description


Office Tab Brings Tabbed interface to Office, and Make Your Work Much Easier

  • Enable tabbed editing and reading in Word, Excel, PowerPoint, Publisher, Access, Visio and Project.
  • Open and create multiple documents in new tabs of the same window, rather than in new windows.
  • Increases your productivity by 50%, and reduces hundreds of mouse clicks for you every day!
Comments (32)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
klo mengulang Makro sebanyak 3 kali, atau seberapa kali yang kita mau, itu gi mana yahh ? trima kasih sebelumny...
This comment was minimized by the moderator on the site
Hi Rizal,

The following VBA code can help. Please give it a try. Thank you.
Notes: In the code, you need to configure the following lines to meet your needs:
1) In this line: If Val(xNum) = 3 Then
Here the number 3 represents the number of times you want to repeat the macro. After three times looping, the macro will stop. Please change it to the number of times you need.
2) In this line: Application.OnTime Now() + TimeValue("0:" + "0" + ":10"), "ReRunMacro"
The number 10 here means that the macro will repeat every 10 seconds. You can specify the hours, minutes and seconds as you need.
Sub ReRunMacro()
'Updated by Extendoffice 20230203
Dim xMin As String
Dim xNum As String
'Insert your code here

Dim xRg As Range
    Dim xCell As Range
    Dim I As Long
    Dim J As Long
    Dim K As Long
    I = Worksheets("Sheet1").UsedRange.Rows.Count
    J = Worksheets("Sheet2").UsedRange.Rows.Count
    If J = 1 Then
    If Application.WorksheetFunction.CountA(Worksheets("Sheet2").UsedRange) = 0 Then J = 0
    End If
    Set xRg = Worksheets("Sheet1").Range("C1:C" & I)
    On Error Resume Next
    Application.ScreenUpdating = False
    For K = 1 To xRg.Count
        If CStr(xRg(K).Value) = "Done" Then
            xRg(K).EntireRow.Copy Destination:=Worksheets("Sheet2").Range("A" & J + 1)
            J = J + 1
        End If
    Next
    Application.ScreenUpdating = True

    xMin = GetSetting(AppName:="Kutools", Section:="Macro", Key:="min", Default:="")
    xNum = GetSetting(AppName:="Kutools", Section:="Macro", Key:="Num", Default:="")
    If xMin = "Exit" Then
    SaveSetting "Kutools", "Macro", "min", "False"
    Exit Sub
    End If
    
    If xNum = "" Then xNum = "1"
    If Val(xNum) = 3 Then 'Here the number 3 represents the number of times you want to repeat the macro. After three times looping, the macro will stop
        xNum = 1
        SaveSetting "Kutools", "Macro", "Num", "1"
        Application.OnTime EarliestTime:=TimeValue("17:00:00"), Procedure:="ReRunMacro", Schedule:=False
        Exit Sub
    End If
    xNum = Str(Val(xNum) + 1)
    SaveSetting "Kutools", "Macro", "Num", xNum

    If (xMin = "") Or (xMin = "False") Then
      xMin = Application.InputBox(prompt:="Please input the interval time you need to repeat the Macro", Title:="Kutools for Excel", Type:=2)
      SaveSetting "Kutools", "Macro", "min", xMin
    End If
    
    If (xMin <> "") And (xMin <> "False") Then
      Application.OnTime Now() + TimeValue("0:" + "0" + ":10"), "ReRunMacro" 'The number 10 here means that the macro will repeat every 10 seconds. You can specify the hours, minutes and seconds as you need.
    Else
      Exit Sub
    End If
End Sub
This comment was minimized by the moderator on the site
please make repetitions for the following commands, thanks..

Sheets("Sisa").Select
Range("D2:D12000").Copy
Range("E2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Input").Select
Range("A3").End(xlDown).Offset(1, 0).FormulaR1C1 = "=R[-1]C+1"
Range("A3").End(xlDown).Offset(0, 21).Select
ActiveCell.FormulaR1C1 = _
"=IFERROR(IF(RC[-17]="""",VLOOKUP(RC[-18]&VLOOKUP(RC[-15],Kayu!C[-20]:C[-19],2,)&RC[-13]+RANDBETWEEN(1,3)&""Belum LHP"",Sisa!C[-21]:C[-14],8,),RC[-17]),"""")"
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A3").End(xlDown).Offset(0, 22).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[-1]="""",IFERROR(VLOOKUP(RC[-19]&VLOOKUP(RC[-16],Kayu!C[-21]:C[-20],2,)&RC[-14]+1&""Belum LHP"",Sisa!C[-22]:C[-15],8,),""""),RC[-1])"
Range("A3").End(xlDown).Offset(0, 23).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[-1]="""",IFERROR(VLOOKUP(RC[-20]&VLOOKUP(RC[-17],Kayu!C[-22]:C[-21],2,)&RC[-15]+2&""Belum LHP"",Sisa!C[-23]:C[-16],8,),""""),RC[-1])"
Range("A3").End(xlDown).Offset(0, 24).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[-1]="""",IFERROR(VLOOKUP(RC[-21]&VLOOKUP(RC[-18],Kayu!C[-23]:C[-22],2,)&RC[-16]+3&""Belum LHP"",Sisa!C[-24]:C[-17],8,),""""),RC[-1])"
Range("A3").End(xlDown).Offset(0, 25).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[-1]="""",IFERROR(VLOOKUP(RC[-22]&VLOOKUP(RC[-19],Kayu!C[-24]:C[-23],2,)&RC[-17]+4&""Belum LHP"",Sisa!C[-25]:C[-18],8,),""""),RC[-1])"
Range("A3").End(xlDown).Offset(0, 26).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[-1]="""",IFERROR(VLOOKUP(RC[-23]&VLOOKUP(RC[-20],Kayu!C[-25]:C[-24],2,)&RC[-18]+5&""Belum LHP"",Sisa!C[-26]:C[-19],8,),""""),RC[-1])"
Range("A3").End(xlDown).Offset(0, 4).Select
ActiveCell.FormulaR1C1 = _
"=IF(RC[22]="""",IFERROR(VLOOKUP(RC[-1]&VLOOKUP(RC[2],Kayu!C[-3]:C[-2],2,)&RC[4]+0&""Belum LHP"",Sisa!C[-4]:C[3],8,),""""),RC[22])"
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
This comment was minimized by the moderator on the site
Compile error:

Expected End Sub

Mam przekopiowane dokładnie jak jest napisane wyzej i nie moge odnaleźć problemu
This comment was minimized by the moderator on the site
Hi Pawid,
Can you provide a screenshot of the error and the highlighted row in the vba code? The problem could not be reproduced in my case. Sorry for the inconvinience.
This comment was minimized by the moderator on the site
In Excel 365 I'm getting a Run-time error '13' Type mismatch on the following line: Application.OnTime Now() + TimeValue("0:" + "0:" + xMin), "ReRunMacro"
This comment was minimized by the moderator on the site
Hi Ron Franklin,I tried  it in Excel 365, but this problem could not be reproduced. 
This comment was minimized by the moderator on the site
có cách nào dừng macro khi tắt file và macro tự khởi động lại khi mở lại file không add
This comment was minimized by the moderator on the site
I am pasting the code below in which I have replaced the line to enter the code with my code. The error I am getting is- Compile error: Expected End Sub. Kindly help.

Sub ReRunMacro()
Dim xMin As String
Sub Refresh()
'
' Refresh Macro
'

'
Sheets("Sheet1").Select
ActiveWorkbook.RefreshAll
Sheets("Pivot-Dash").Select
End Sub


xMin = GetSetting(AppName:="Kutools", Section:="Macro", Key:="min", Default:="")
If xMin = "Exit" Then
SaveSetting "Kutools", "Macro", "min", "False"
Exit Sub
End If
If (xMin = "") Or (xMin = "False") Then
xMin = Application.InputBox(prompt:="Please input the interval time you need to repeat the Macro", Title:="Kutools for Excel", Type:=2)
SaveSetting "Kutools", "Macro", "min", xMin
End If
If (xMin <> "") And (xMin <> "False") Then
Application.OnTime Now() + TimeValue("0:" + xMin + ":0"), "ReRunMacro"
Else
Exit Sub
End If
This comment was minimized by the moderator on the site
Good day,You need to remove the Sub line and the End Sub line from your code.<div data-tag="code">Sub Refresh()
'
' Refresh Macro
'

'
Sheets("Sheet1").Select
ActiveWorkbook.RefreshAll
Sheets("Pivot-Dash").Select
End SubChange to:<div data-tag="code">'
' Refresh Macro
'

'
Sheets("Sheet1").Select
ActiveWorkbook.RefreshAll
Sheets("Pivot-Dash").Select
This comment was minimized by the moderator on the site
Hi Jack,By mistake I entered 0.5 mins and it shows an error,
I mean xMin is taken as 0.5 minutes.
How to get rid and change it to 1 min?
This comment was minimized by the moderator on the site
Hi LIMCA,
Sorry for the inconvenience. The code does not support entering decimals.

Please stop the the looping by running the below VBA code, and then rerun the looping code and enter 1 into the popping up dialog box.

Sub ExitReRunMacro()

SaveSetting "Kutools", "Macro", "min", "Exit"

End Sub
This comment was minimized by the moderator on the site
How to create a macro in excel with continuous loop and pressed key would be only pg up and pg down
This comment was minimized by the moderator on the site
Hi very useful, however I think I messed up and set the time as 0.5 and now I cannot chage it, any ideas how to change the xMin Setting?
This comment was minimized by the moderator on the site
Hi, I messed up and set the time as 0.5 and now I cannot chage it, any ideas how to change the xMin Setting?
This comment was minimized by the moderator on the site
Hi David.

As we mentioned at the end of the post, if you need to stop the execution of the macro and change the interval of the cycle, please copy the below VBA code into the same Module window and press the F5 key to run the code. Then the Macro will be stopped, please rerun the above code to specify a new interval.



Sub ExitReRunMacro()

SaveSetting "Kutools", "Macro", "min", "Exit"

End Sub
This comment was minimized by the moderator on the site
Hey, Thanks! but im afraid the marco doenst even run, when I press F5 excel sends me this error msgs: Run time error 13 'Type Missmatch".



I deleted it, but If I try to create it again the same error msg appears, my only guess is that I set the time as 0.5 and in the code, so no idea how to modify it now.



Thanks Again for your help.
This comment was minimized by the moderator on the site
Hello, Just help me out on "insert your code here". I am a novice and need help on what to fill and how ! ThanksI am not getting it right
This comment was minimized by the moderator on the site
Hi Padma,
The "insert your code here" indicate the VBA code you use to achieve some operation in Excel. Supposing you need to apply VBA to move a row to another sheet based on a specific value, and want to run the code every X minutes automatically, you need to place the VBA code here.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations