Consejo: Otros idiomas son traducidos por Google. Puedes visitar el English versión de este enlace.
Iniciar sesión
x
or
x
x
Suscríbete
x

or

¿Cómo crear una lista desplegable con múltiples selecciones o valores en Excel?

De forma predeterminada, cuando crea una lista desplegable de validación de datos en su hoja de trabajo, puede seleccionar solo un elemento por vez en la lista. Pero si desea seleccionar varios valores en la lista desplegable, ¿qué haría? En este artículo, le mostraremos cómo mejorar la selección en la lista desplegable.

Crear lista desplegable con múltiples selecciones con código VBA


Usted puede interesarse en:

Combine varias hojas de trabajo / libros de trabajo en una hoja de trabajo / libro de trabajo:

Combine varias hojas de trabajo o libros de trabajo en una única hoja de trabajo o libro de trabajo puede ser una gran tarea en su trabajo diario. Pero, si tienes Kutools for Excel, su poderosa utilidad - Combinar puede ayudarlo a combinar rápidamente varias hojas de trabajo, libros de trabajo en una sola hoja de cálculo o libro de trabajo.

Kutools for Excel incluye más de las útiles herramientas de Excel de 300. Gratis para probar sin limitaciones en los días 60. Más info Descargue la versión de prueba gratuita ahora

Ficha Office Habilite la edición y navegación con pestañas en Office y haga su trabajo mucho más fácil ...
Kutools for Excel trae las características avanzadas de 300 a Excel y aumenta su productividad en 80%
  • Super Formula Bar (edite fácilmente múltiples líneas de texto y fórmulas); Diseño de lectura (lea y edite fácilmente un gran número de celdas); Pegar en rango filtrado ...
  • Combinar celdas / filas / columnas y mantener datos; Contenido de celdas divididas; Combine filas duplicadas y suma / promedio ... Prevenga celdas duplicadas; Comparar rangos ...
  • Seleccione Filas duplicadas o únicas; Seleccione Filas en blanco (todas las celdas están vacías); Super Find y Fuzzy Find en muchos libros de trabajo; Selección aleatoria ...
  • Copia exacta de varias celdas sin cambiar la referencia de fórmula; Crear referencias automáticamente a varias hojas; Insertar viñetas, casillas de verificación y más ...
  • Favorito e inserte rápidamente fórmulas, rangos, gráficos e imágenes; Cifrar celdas con contraseña; Crear lista de correo y enviar correos electrónicos ...
  • Extraer texto, Agregar texto, Eliminar por posición, Eliminar espacio; Crear e imprimir subtotales de paginación; Convertir entre contenido de celdas y comentarios ...
  • Super filtro (guardar y aplicar esquemas de filtro a otras hojas); Avanzado Ordenar por mes / semana / día, frecuencia y más; Filtro especial por negrita, cursiva ...
  • Combinar libros de trabajo y hojas de trabajo; Combinar tablas basadas en columnas clave; Dividir datos en varias hojas; Conversión por lotes xls, xlsx y PDF ...
  • Funciona con Office 2007-2019 y 365, y es compatible con todos los idiomas. Es fácil de implementar en su empresa. Funciones completas de prueba gratuita de 60-day.


Crear lista desplegable con múltiples selecciones con código VBA

Con el método VBA, su lista desplegable puede seleccionar varios valores en lugar de uno en su hoja de cálculo.

1. Después de crear su lista desplegable, por ejemplo, su lista desplegable se encuentra en sheet1, haga clic con el botón derecho en la pestaña Sheet1 y haga clic en Ver código en el menú contextual. Ver captura de pantalla:

2. En el Microsoft Visual Basic para aplicaciones ventana, haga doble clic en Sheet1 para abrir el editor de Código, luego copie y pegue el siguiente código de VBA en el editor. Ver captura de pantalla:

Código VBA: lista desplegable con múltiples selecciones

Private Sub Worksheet_Change(ByVal Target As Range)
    'Updated: 2016/4/12
    Dim xRng As Range
    Dim xValue1 As String
    Dim xValue2 As String
    If Target.Count > 1 Then Exit Sub
    On Error Resume Next
    Set xRng = Cells.SpecialCells(xlCellTypeAllValidation)
    If xRng Is Nothing Then Exit Sub
    Application.EnableEvents = False
    If Not Application.Intersect(Target, xRng) Is Nothing Then
        xValue2 = Target.Value
        Application.Undo
        xValue1 = Target.Value
        Target.Value = xValue2
        If xValue1 <> "" Then
            If xValue2 <> "" Then
                If xValue1 = xValue2 Or _
                   InStr(1, xValue1, ", " & xValue2) Or _
                   InStr(1, xValue1, xValue2 & ",") Then
                    Target.Value = xValue1
                Else
                    Target.Value = xValue1 & ", " & xValue2
                End If
            End If
        End If
    End If
    Application.EnableEvents = True
End Sub

3. Luego haga clic Envíe el > Cerrar y volver a Microsoft Excel Para salir del Microsoft Visual Basic para aplicaciones ventana.

4. Vaya a la lista desplegable que ha creado, puede seleccionar varios valores de la lista como se muestra a continuación.

Notas:

1. Los valores duplicados no se permiten en la lista desplegable.

2. El código de VBA solo puede funcionar para el libro abierto actual. Si cierra y vuelve a abrir el libro de trabajo, el código de VBA se eliminará automáticamente de su hoja de trabajo, y la selección múltiple ya no se podrá usar. Por lo tanto, debe guardar el libro de trabajo como formato de cuaderno habilitado para macro de Excel cuando guarde su libro de trabajo.


Artículos relacionados:


Kutools for Excel: la mejor herramienta de productividad de Office aumenta su productividad en un 80%

  • Super Formula Bar (edite fácilmente varias líneas de texto y fórmula); Diseño de lectura (lee y edita fácilmente un gran número de celdas); Pegar en rango filtrado...
  • Combinar celdas / filas / columnas y mantener datos; Contenido de celdas divididas; Combinar filas duplicadas y suma / promedio... Prevenir células duplicadas; Comparar rangos...
  • Seleccione Duplicado o Único Filas; Seleccionar filas en blanco (todas las celdas están vacías); Super Find y Fuzzy Find en muchos libros de trabajo; Selección aleatoria ...
  • Copia exacta Celdas múltiples sin cambiar la referencia de fórmula; Crear referencias automáticamente a múltiples hojas; Insertar viñetas, Casillas de verificación y más ...
  • Fórmulas favoritas e insertadas rápidamente, Gamas, cuadros y cuadros; Cifrar celdas con contraseña Crear una lista de correo y enviar correos electrónicos ...
  • Extracto del texto, Agregar texto, Eliminar por posición, Eliminar espacio; Crear e imprimir subtotales de paginación; Convertir entre contenido de celdas y comentarios...
  • Súper filtro (guardar y aplicar esquemas de filtro a otras hojas); Clasificación avanzada por mes / semana / día, frecuencia y más; Filtro especial por negrita, cursiva ...
  • Combinar libros de trabajo y hojas de trabajo; Combinar tablas basadas en columnas clave; Dividir datos en varias hojas; Conversión por lotes xls, xlsx y PDF...
  • Funciona con Office 2007-2019 y 365, y es compatible con todos los idiomas. Es fácil de implementar en su empresa. Funciones completas de prueba gratuita de 60-day.
pestaña kte 201905

Office Tab lleva la interfaz con pestañas a Office y hace que su trabajo sea mucho más fácil

  • Habilitar la edición y lectura con pestañas en Word, Excel, PowerPoint, Editor, Acceso, Visio y Proyecto.
  • Abra y cree varios documentos en nuevas pestañas de la misma ventana, en lugar de en nuevas ventanas.
  • ¡Aumenta tu productividad en un 50% y reduce cientos de clics de ratón por ti todos los días!
fondo officetab
Say something here...
symbols left.
You are guest ( Sign Up? )
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    Randy · 1 years ago
    I'm trying to create 4 columns with drop down lists where I can select multiple values. How do I modify the "drop down list with multiple selections" VBA code so that when I click on a value that has already been entered it removes it from the cell? Thank you in advance.
    • To post as a guest, your comment is unpublished.
      crystal · 1 years ago
      Dear Randy,
      What do you mean "when I click on a value that has already been entered it removes it from the cell?"
      • To post as a guest, your comment is unpublished.
        Dez · 1 years ago
        I have the same question. My drop down list does not remember values selected. If someone clicks on a cell that has already been populated (not by them, but someone else) the selected values are cleared and the cell is blank again.
  • To post as a guest, your comment is unpublished.
    Johnna · 1 years ago
    I created a drop down list where multiple text selections could be chosen such as "nutrition" ,"weight", and "work" for each caller's reason to phone in. I have a summary page where I want to see how many of each reason were indicated in a particular month. What formula would I use to tell Excel to pull out and tally each of these separately in a given month? Currently, the way I have it set up, it only tallies correctly if I have one reason in the cell for each caller.
    • To post as a guest, your comment is unpublished.
      crystal · 1 years ago
      Good Day,
      Sorry can't help you solve this problem. Please let me know if you find the answer.
  • To post as a guest, your comment is unpublished.
    Nancy · 2 years ago
    I managed to use this code and successfully create multiple selection drop down boxes. It worked when I closed and re-opened on different days. However, now not all of the cells I originally selected are allowing multiple selection. Only ones done previously, despite using the code for the whole spreadsheet. Can you help?
    • To post as a guest, your comment is unpublished.
      yesenia · 1 years ago
      the cells are most likely locked, right click on all of them, go to format cells, protection, then uncheck the locked cell option
    • To post as a guest, your comment is unpublished.
      Lisa Thompson · 2 years ago
      I'm having the same problem.
  • To post as a guest, your comment is unpublished.
    Desiree · 2 years ago
    Hi all,

    I could do my drop down list perfectly, but my question is: when I select all the items nedded it goes one after another in an horizontal way through the cell, for example: yellow, green, black, red. But how can I make it look in a vertical way?, more like for example: Orange
    blanck
    yellow
    Red
    Because in horizontal the cell becomes pretty long when selecting lots of items.

    Could you please tell me if there's any way to do this?.

    Thank you,

    Desiree
  • To post as a guest, your comment is unpublished.
    Chloe · 2 years ago
    Hi all,

    I have this code on an excel sheet and its cleaning the contents from the drop down list when the cell is selected - I know what part of the code is doing it (the part that says 'fillRng.ClearContents') and I have tried to use some of the above to fix it unsuccessfully... I am new to VBA programming etc. Can anyone offer any help on how to change it so that it when the cell is selected it doesn't clear and entries wont be duplicated please??

    Option Explicit
    Dim fillRng As Range
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)

    Dim Qualifiers As MSForms.ListBox
    Dim LBobj As OLEObject
    Dim i As Long

    Set LBobj = Me.OLEObjects("ListBox1")
    Set Qualifiers = LBobj.Object

    If Target.Row > 3 And Target.Column = 3 Then
    Set fillRng = Target
    With LBobj
    .Left = fillRng.Left
    .Top = fillRng.Top
    .Width = fillRng.Width
    .Height = 155
    .Visible = True
    End With
    Else
    LBobj.Visible = False
    If Not fillRng Is Nothing Then
    fillRng.ClearContents
    With Qualifiers
    If .ListCount 0 Then
    For i = 0 To .ListCount - 1
    If fillRng.Value = "" Then
    If .Selected(i) Then fillRng.Value = .List(i)
    Else
    If .Selected(i) Then fillRng.Value = _
    fillRng.Value & ", " & .List(i)
    End If
    Next
    End If
    For i = 0 To .ListCount - 1
    .Selected(i) = False
    Next
    End With
    Set fillRng = Nothing
    End If
    End If

    End Sub
  • To post as a guest, your comment is unpublished.
    Ramon · 3 years ago
    Hi there,

    Code works fine. However, I can't seem to deselect an item. When I want to remove an item from the selection, it's just not removed. Does anybody else experience this problem too?
    • To post as a guest, your comment is unpublished.
      StPaulSue · 2 years ago
      delete the content in the cell, then reselect
    • To post as a guest, your comment is unpublished.
      THG · 2 years ago
      Was there a response to this issue. It is the same issue I am having. There doesn't seem to be a way to remove an item that has been selected.
  • To post as a guest, your comment is unpublished.
    Charity · 3 years ago
    This works well, but I am unable to remove an item once selected. Any suggestions in case I click on something accidently and need to remove it without (hopefully) clearing the whole cell and starting over?

    Also, for those seeking to define a column or columns, Contextures has a great addition to the code provided here that allows you to do that.
    http://www.contextures.com/excel-data-validation-multiple.html#column
    • To post as a guest, your comment is unpublished.
      Nirmala · 2 years ago
      [quote name="Charity"]This works well, but I am unable to remove an item once selected. Any suggestions in case I click on something accidently and need to remove it without (hopefully) clearing the whole cell and starting over?

      Also, for those seeking to define a column or columns, Contextures has a great addition to the code provided here that allows you to do that.
      http://www.contextures.com/excel-data-validation-multiple.html#column[/quote]

      Code works fine. However, I can't seem to deselect an item. When I want to remove an item from the selection, it's just not removed. Does anybody else experience this problem too?[/quote]

      Hi all,

      Any solutions found for this problem..please share..
  • To post as a guest, your comment is unpublished.
    stef · 3 years ago
    Hi I am currently using this formula and all columns with data validation have the multiple selection option now, however I want to restrict the multiple selection only to one column. Can someone edit this formula for me so the multiple selection can be applied only to Column4? Thanks :)

    Private Sub Worksheet_Change(ByVal Target As Range)
    'Updated: 2016/4/12
    Dim xRng As Range
    Dim xValue1 As String
    Dim xValue2 As String
    If Target.Count > 1 Then Exit Sub
    On Error Resume Next
    Set xRng = Cells.SpecialCells(xlCellTypeAllValidation)
    If xRng Is Nothing Then Exit Sub
    Application.EnableEvents = False
    If Not Application.Intersect(Target, xRng) Is Nothing Then
    xValue2 = Target.Value
    Application.Undo
    xValue1 = Target.Value
    Target.Value = xValue2
    If xValue1 "" Then
    If xValue2 "" Then
    If xValue1 = xValue2 Or _
    InStr(1, xValue1, ", " & xValue2) Or _
    InStr(1, xValue1, xValue2 & ",") Then
    Target.Value = xValue1
    Else
    Target.Value = xValue1 & ", " & xValue2
    End If
    End If
    End If
    End If
    Application.EnableEvents = True
    End Sub

    Any assistance will be appreciated!
  • To post as a guest, your comment is unpublished.
    Mervyn · 3 years ago
    @Cynthia,

    If still required, you should be able to do something like this to only ensure the code runs on specific columns, in my case, column 34 and 35:

    If (Target.Column 34 And Target.Column 35) Then Exit Sub

    'Put this code at the beginning after your dim statements
    • To post as a guest, your comment is unpublished.
      Dhina · 1 years ago
      If Target.Column <> 34 Then Exit Sub

      'Put this code at the beginning after your dim statements
    • To post as a guest, your comment is unpublished.
      CynthiaB · 2 years ago
      [quote name="Mervyn"]@Cynthia,

      If still required, you should be able to do something like this to only ensure the code runs on specific columns, in my case, column 34 and 35:

      If (Target.Column 34 And Target.Column 35) Then Exit Sub

      'Put this code at the beginning after your dim statements[/quote]


      Hi @Mervyn,

      Lost track of the thread completely, but thank you so much for your responses.

      I've tried applying the
      If (Target.Column 34 And Target.Column 35) Then Exit Sub
      (my version reads If (Target.Column4 And Target.Column5) Then Exit Sub
      as you supplied, but am getting a "Run-time error '438': Object doesn't support this property or method"" error on this new line.

      Here are the first few lines of my code:

      Private Sub Worksheet_Change(ByVal Target As Range)
      Dim xRng As Range
      Dim xValue1 As String
      Dim xValue2 As String
      If (Target.Column4 And Target.Column5) Then Exit Sub
      If Target.Count > 1 Then Exit Sub

      On Error Resume Next


      My worksheet only has 6 columns: Question | Answer | Category | Sub-Category | Tags | Photo link
      I only need multiple value drop downs in Sub-Category and Tags (columns 4 & 5).

      I'll keep looking for info as you suggested on 12/23, and will look at the link Charity provided.
  • To post as a guest, your comment is unpublished.
    Mervyn · 3 years ago
    Hi Cynthia,

    If the original author doesn't reply, I'll get you an answer but I'll only be in front of a computer on 29 Dec again. I'm also no VBA programmer. What you can do in the mean time is Google search how to identify the column number and only let the code run if data is edited in that specific column(s). I've done it but the code is on my work PC and can't recall it at the moment,maybe try putting a debug.print on target.column or something to that effect to see if it gives you the column number being edited.

    Sorry Jennifer, not sure about the issue you're having :(
  • To post as a guest, your comment is unpublished.
    Jennifer L Price · 3 years ago
    I was able to get the code to work, but then when I saved the document (with macros-enabled), closed it and returned, the code didn't work anymore (though it was still in there). I can't figure out what I've done wrong. Any ideas?
  • To post as a guest, your comment is unpublished.
    CynthiaB · 3 years ago
    Hi. Thank you for the code and the addition to limit duplicates.


    One more request - what addition/change would have to be made in order to allow multiple selection in only one or two specific columns? This code is re-adding lines of text to what should be 'plain' cells if I go to correct a typo, or make a change or addition to the text in the cell, as opposed to just behaving 'normally' and accepting the change (without re-adding the entire text again).

    For instance, column A is a 'plain' column. I write a sentence "What are the three itmes you want most?" Column B is a 'list' column where I only want to be able to pick one single value (in this case, let's say a child's name). Column C is another 'list' column where the user must be able to select multiple items (which this code allows me to do perfectly).

    As I go along, I realize that I've made a typo in column A and want to correct it. As this code stands, if I go in (double click, F2) and make the correction to the word "items", I end up with this result in my cell:"What are the three itmes you want most? What are the three items you want most?"

    thank you in advance for any help (from a user that REALLY likes VBA, but is still at the very earliest stages of learning!)
  • To post as a guest, your comment is unpublished.
    Mervyn · 3 years ago
    Just realised I didn't exit the loop in the new function if the condition has been set so we don't have to check other entries.
  • To post as a guest, your comment is unpublished.
    Mervyn · 3 years ago
    You can change the code in the following lines to prevent the duplicates:
    If xValue2 "" Then
    Target.Value = xValue1 & ", " & xValue2
    End If

    To:
    If xValue2 "" Then
    If CheckIfAlreadyAdded(xValue1, xValue2) = False Then
    Target.Value = xValue1 & ", " & xValue2
    Else
    Target.Value = xValue1
    End If
    End If

    And then add the following function:
    Private Function CheckIfAlreadyAdded(ByVal sText As String, sNewValue As String) As Boolean

    CheckIfAlreadyAdded = False

    Dim WrdArray() As String
    WrdArray() = Split(sText, ",")

    For i = LBound(WrdArray) To UBound(WrdArray)
    If Trim(WrdArray(i)) = Trim(sNewValue) Then CheckIfAlreadyAdded = True
    Next i

    End Function

    --
    There's probably better ways of coding it but it works for now.
  • To post as a guest, your comment is unpublished.
    MichaelB · 3 years ago
    It is great that this allows multiple selections but like @Yezdi commented, I am finding it will add one or several duplicates even if I don't choose them.

    So, at present, this is an 80% solution... one tweak away from perfect. I am not a VB coder or I'd offer the solution.
  • To post as a guest, your comment is unpublished.
    Yezdi Eks · 3 years ago
    Hi,

    Thanks for the solution and the code.

    But the next step is how to make sure that the user
    does not select "duplicate" values from the dropdown list.

    E.g. If there are 4 items in the list -
    orange, apple, banana, peach

    and if the user has already selected "orange", then excel
    should not allow the user to select "orange" OR that option
    should be removed from the remainder of the list.

    Can you please publish the code to accomplish this feature.

    Thanks.

    Yezdi
    • To post as a guest, your comment is unpublished.
      sunshine · 3 years ago
      Hi Yezdi,
      Thank you for your comment. The code was updated and no duplicate values allow in the drop-down list now.

      Thanks.

      Sunshine