Consejo: Otros idiomas son traducidos por Google. Puedes visitar el English versión de este enlace.
Iniciar sesión
x
or
x
x
Suscríbete
x

or

¿Cómo autofiltrar filas según el valor de celda en Excel?

Normalmente, la función de Filtro en Excel puede ayudarnos a filtrar cualquier información que necesitemos, pero, a veces, me gustaría filtrar automáticamente las celdas en base a una entrada de celda manual, lo que significa que cuando ingreso un criterio en una celda, los datos pueden ser filtrado automáticamente a la vez. ¿Hay alguna buena idea para lidiar con este trabajo en Excel?

Filas de filtro automático basadas en el valor de celda que ingresó con el código VBA

Filtrar datos por múltiples criterios u otras condiciones específicas, como por longitud de texto, por mayúsculas y minúsculas


Filas de filtro automático basadas en el valor de celda que ingresó con el código VBA


Suponiendo que tengo el siguiente rango de datos, ahora, cuando ingrese los criterios en la celda E1 y E2, quiero que los datos se filtren automáticamente como se muestra a continuación:

doc auto filter 1

1. Vaya a la hoja de trabajo en la que desea filtrar automáticamente la fecha según el valor de la celda que ingresó.

2. Haga clic con el botón derecho en la pestaña de la hoja y seleccione Ver código desde el menú contextual, en el emergente Microsoft Visual Basic para aplicaciones ventana, copie y pegue el siguiente código en el espacio en blanco Módulo ventana, ver captura de pantalla:

Código VBA: datos de filtro automático de acuerdo con el valor de celda ingresado:

Private Sub Worksheet_Change(ByVal Target As Range)
'Updateby Extendoffice 20160606
   If Target.Address = Range("E2").Address Then
       Range("A1:C20").CurrentRegion.AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("E1:E2")
   End If
End Sub

doc auto filter 2

Nota: En el código anterior, A1: C20 es su rango de datos que desea filtrar, E2 es el valor objetivo sobre el que desea filtrar, y E1: E2 es su celda de criterio se filtrará en función de. Puede cambiarlos a su necesidad.

3. Ahora, cuando ingresas los criterios en la celda E1 y E2 y pulse entrar clave, sus datos serán filtrados por los valores de la celda automáticamente.


Filtrar datos por múltiples criterios u otras condiciones específicas, como por longitud de texto, por mayúsculas y minúsculas

Filtrar datos por múltiples criterios u otras condiciones específicas, como por longitud de texto, por mayúsculas y minúsculas, etc.

Kutools for Excel, Súper filtro característica es una herramienta poderosa, puede aplicar esta característica para finalizar las siguientes operaciones:

  • Filtrar datos con múltiples criterios; Filtrar datos por longitud de texto;
  • Filtrar los datos por mayúsculas / minúsculas; Filtrar la fecha por año / mes / día / semana / trimestre

doc-super-filter1

Kutools for Excel: con más de 200 útiles complementos de Excel, de prueba sin límite en días 60. Descargar y prueba gratis ahora!


Demostración: filas de filtro automático basadas en el valor de celda que ingresó con el código VBA


Kutools for Excel: la mejor herramienta de productividad de Office aumenta su productividad en un 80%

  • Super Formula Bar (edite fácilmente varias líneas de texto y fórmula); Diseño de lectura (lee y edita fácilmente un gran número de celdas); Pegar en rango filtrado...
  • Combinar celdas / filas / columnas y mantener datos; Contenido de celdas divididas; Combinar filas duplicadas y suma / promedio... Prevenir células duplicadas; Comparar rangos...
  • Seleccione Duplicado o Único Filas; Seleccionar filas en blanco (todas las celdas están vacías); Super Find y Fuzzy Find en muchos libros de trabajo; Selección aleatoria ...
  • Copia exacta Celdas múltiples sin cambiar la referencia de fórmula; Crear referencias automáticamente a múltiples hojas; Insertar viñetas, Casillas de verificación y más ...
  • Fórmulas favoritas e insertadas rápidamente, Gamas, cuadros y cuadros; Cifrar celdas con contraseña Crear una lista de correo y enviar correos electrónicos ...
  • Extracto del texto, Agregar texto, Eliminar por posición, Eliminar espacio; Crear e imprimir subtotales de paginación; Convertir entre contenido de celdas y comentarios...
  • Súper filtro (guardar y aplicar esquemas de filtro a otras hojas); Clasificación avanzada por mes / semana / día, frecuencia y más; Filtro especial por negrita, cursiva ...
  • Combinar libros de trabajo y hojas de trabajo; Combinar tablas basadas en columnas clave; Dividir datos en varias hojas; Conversión por lotes xls, xlsx y PDF...
  • Más de potentes funciones de 300. Funciona con Office 2007-2019 y 365. Soporta todos los idiomas. Fácil despliegue en compañía. Funciones completas de prueba gratuita de 60-day.
pestaña kte 201905

Office Tab lleva la interfaz con pestañas a Office y hace que su trabajo sea mucho más fácil

  • Habilitar la edición y lectura con pestañas en Word, Excel, PowerPoint, Editor, Acceso, Visio y Proyecto.
  • Abra y cree varios documentos en nuevas pestañas de la misma ventana, en lugar de en nuevas ventanas.
  • ¡Aumenta tu productividad en un 50% y reduce cientos de clics de ratón por ti todos los días!
fondo officetab
Say something here...
symbols left.
You are guest ( Sign Up? )
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    tim · 28 days ago
    Hey guys,
    perfect Explanation, thank you very much.
    1 Little question: if I want to filter with 2,3 4 or more criterias how do I do this?
    For example I want to say I wanna see the Name Henry, with Grade 1 and this Age...so not just 1 criteria but for example 3..=?


    thanks for the respond


    Kind regards,


    TIM
    • To post as a guest, your comment is unpublished.
      skyyang · 23 days ago
      Hi, tim,
      To auto filter data based on multiple criteria, you should apply the below code: (please change the cell references to your need)

      Private Sub Worksheet_Change(ByVal Target As Range)
      'Update by Extendoffice
      Dim xVStr As String
      Dim xFStr As String
      xVStr = "E22:G22" 'the criteria that you want to filter based on
      xFStr = "E21:G22" 'the range contains the header of the criteria
      If Not (Intersect(Range(xVStr), Target) Is Nothing) Then
      Range("A1:C17").CurrentRegion.AdvancedFilter Action:=xlFilterInPlace, _
      CriteriaRange:=Range(xFStr)
      End If
      End Sub


      Please try, hope it can help you!
  • To post as a guest, your comment is unpublished.
    Bogdan · 1 months ago
    Hello,

    What if I got the filtered data in a different tab(sheet 2) in the same workbook and the cell that the filter needs to refer to is in the first tab(sheet 1). I used this VBA but is not working like that, only if I have both the criteria cell(E2 in this VBA) in the same tab with the filtered data(A1:C20)
  • To post as a guest, your comment is unpublished.
    mjr_awesome · 1 months ago
    There might be a mistake in the instructions. Instead of pasting the code into a blank Module, one should paste it into the Sheet window. For example, if the macro is to work on Sheet1, the code should be pasted into Microsoft Excel Objects -> Sheet1(Sheet1). Only then it works for me on Excel 2016.

    Thanks for the code!
    • To post as a guest, your comment is unpublished.
      skyyang · 1 months ago
      Hi, mjr,
      There is no mistake in this article, the article said, you should put the VBA code into the sheet module by right click the sheet name and then choose View Code to go to the module.
      But, your operation is correct as well.
      Thank you for your comment.
  • To post as a guest, your comment is unpublished.
    Robert · 6 months ago
    So I have a bunch of values and then a table of data. I am wondering if I can filter that table based on the values similarly to what is explained above. For example I would like to click on a cell that has the value of 3, which corresponds to 3 records(200 rows, 25 columns) that meet a condition and then have my table filtered to just show those records. An example of a condition would be, if one variable is great than 100. I have over 100 of these conditions which is why I would like my table to be linked to it in some way. Any help would be much appreciated. In your example provided, it would be similar to if you just wanted all ages over 3, 6, 9, 12 etc and then you had 25 similar variables.So to filter the table to show only records with age over 3 based on clicking a value from a list that says something like age>3 - 2 records, age>6 - 4 records etc
  • To post as a guest, your comment is unpublished.
    Elliott · 7 months ago
    Is there a way to have it continue to filter with additional boxes. When I write it as ElseIf, it only follows the ElseIf command.
  • To post as a guest, your comment is unpublished.
    murat yazici · 7 months ago
    Private Sub Worksheet_Change(ByVal Target As Range)
    'Updateby Extendoffice 20160606
    If Target.Address = Range("E2").Address Then
    Range("A1:C20").CurrentRegion.AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("E1:E2")
    End If
    End Sub


    E2 HUCRESI YERINE E SUTUNUNUNA YAZILAN SON SATIRA GORE FILITRELEME YAPABILIR MI


    According the code mentioned above , is it possible to make filtration according the written data to the last row of column E ?


    I hope to get help and thanks for your help
    • To post as a guest, your comment is unpublished.
      skyyang · 7 months ago
      Hi, murat,
      The above code works well in the whole worksheet, you just need to change the cell references to your need. Please try it, thank you!
  • To post as a guest, your comment is unpublished.
    Kent · 7 months ago
    The VB script worked beautifully. Many thanks for the post!
  • To post as a guest, your comment is unpublished.
    Bob · 7 months ago
    What happens if you have GRADE11 and GRADE12 for example. Will the filter show these also if you try and filter
    on GRADE1?
    • To post as a guest, your comment is unpublished.
      skyyang · 7 months ago
      Hello, Bob,
      Yes, as you said, when entering part of the text you want to filter, all the cells contain the part text will be filtered out. So, if you type Grade1, all cells contain Grade1, Grade11, Grage123...will be filtered out.
  • To post as a guest, your comment is unpublished.
    Mark · 9 months ago
    Thank you for this code. I have been trying to modify it to work better for me, but having difficulty.

    My sheet has data from A2:G2280 Column A contains street names. I want to be able to type at least part of the street name into A1 and display only data that contains A1 in all or part. So if I type Bro in A1 I would see the rows that have Broad, Broadway and Brook. Of course if A1 is blank I would see everything.



    Sorry I'm not fluent in the Excel VBA lingo, I'm just a 911 dispatcher that knows their is an easier way.



    Thank you.



    Mark
    • To post as a guest, your comment is unpublished.
      skyyang · 9 months ago
      Hello, Mark,
      To solve your problem, please apply the following VBA code:
      Note: In the below code, the A1 is the cell that you want to enter the criteria, A2:D20 is the data range, A is the column contains the criteria that you want to filter from, please change the cell references to your own.

      Private Sub Worksheet_Change(ByVal Target As Range)
      Dim xRg As Range
      Dim xRRg As Range
      Dim xFNum As Integer
      On Error Resume Next
      If Target.Address <> Range("A1").Address Then Exit Sub
      Set xRg = Range("A2:D20").CurrentRegion
      Application.ScreenUpdating = False
      If Target.Text = "" Then
      xRg.Rows.Select
      Selection.EntireRow.Hidden = False
      Application.ScreenUpdating = True
      Exit Sub
      End If
      For xFNum = 1 To xRg.Rows.Count
      Set xRRg = xRg.Range("A" & xFNum)
      xRRg.Rows.Select
      If InStr(xRRg.Text, Target.Text) > 0 Then
      Selection.EntireRow.Hidden = False
      Else
      Selection.EntireRow.Hidden = True
      End If
      Next xFNum
      Application.ScreenUpdating = True
      End Sub

      Please try it, hope it can help you!
      • To post as a guest, your comment is unpublished.
        Mark · 8 months ago
        Thanks for the help.
        I changed A2:D20 to A3:G2281 to represent my data field. Now when I type anything in cell A1 and tab out of the cell rows 2-109 are hidden. It is not filtering and displaying only rows that contain all or in part what is entered in cell A1.



        Any ideas?
  • To post as a guest, your comment is unpublished.
    shahbaaz · 10 months ago
    its working and awsome...thanks
  • To post as a guest, your comment is unpublished.
    George · 1 years ago
    Thank you for this write up! I am trying to adjust the code to allow a range of acceptance.

    Example: I input 5 and it filters and only shows everything that is within .5 of 5, (so 4.5 to 5.5)
  • To post as a guest, your comment is unpublished.
    Javier · 2 years ago
    Doesn't work for me, might be that I have office 2010? doesn't do anything :S
  • To post as a guest, your comment is unpublished.
    Amanda · 2 years ago
    Hi,

    The code below works perfectly. However, how do I disable the macro if I want to unfilter?
    Private Sub Worksheet_Change(ByVal Target As Range)
    'Updateby Extendoffice 20160606
    If Target.Address = Range("E2").Address Then
    Range("A1:C20").CurrentRegion.AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("E1:E2")
    End If
    End Sub
    • To post as a guest, your comment is unpublished.
      KST · 1 years ago
      In Range("E2").Address delete any input. All will "unfilter."
  • To post as a guest, your comment is unpublished.
    ZZted · 2 years ago
    How do I undo it?it hides all of my data.
  • To post as a guest, your comment is unpublished.
    jdvdp · 2 years ago
    I've been trying to filter a worksheet with a variety of codes (taken from various sites, including this one), but none seem to work. In a sheet with information in the cell range A101:EF999 (yes, big one), I want to autofilter the sheet based on a three letter code that I enter into cell B5, which should correspond to rows having that same code in column B101-B999. A sample snippet would look like this:

    A B C D E
    5 ABC
    ...
    101 ABC
    102 DEF
    103 GHI
    104 ABC
    105 JKL
    106 ABC
    107 DEF

    On selecting "ABC" in cell B5, only rows 101, 104 and 106 should be displayed, but nothing happens. Is there something I'm overlooking here? Any help would be much appreciated!
  • To post as a guest, your comment is unpublished.
    Jon · 2 years ago
    THANK YOU SO MUCH FOR THE ABOVE FORMULA - IT WORKS GREAT.