팁 : 다른 언어는 Google 번역입니다. 방문하실 수 있습니다. English 이 링크의 버전.
로그인
x
or
x
x
회원가입
x

or

Excel 21.00 용 Kutools 뜨거운

300 + Excel의 강력한 기능

Excel 용 Kutools

Excel 용 Kutools는 시트를 신속하게 결합하고, 데이터를 잃지 않고 셀을 병합하고, 보이는 셀에만 붙이고, 색상으로 셀을 계산하는 등 Excel에서 시간 소모적 인 작업을 수행하지 못하도록하는 강력한 추가 기능입니다. Excel 300, 2019, 2016, 2013, 2010 또는 Office 2007 용 365 + 강력한 기능 / 기능!

더 보기 다운로드 주문

Office 탭 14.00뜨거운

Office에 탭 인터페이스 추가

사무실 탭

Microsoft Office 응용 프로그램의 탭 브라우징, 편집 및 관리가 가능합니다. IE 8 / 9 / 10, Firefox 및 Chrome과 같은 브라우저를 사용하여 여러 개의 문서 / 파일을 하나의 탭 창에서 열 수 있습니다. Office 2019, 2016, 2013, 2010, 2007, 2003 또는 Office 365과 호환됩니다. 데모

더 보기 다운로드 주문

Outlook 12.00 용 Kutools새로운

Outlook 용 100 + 강력한 기능

Kutools-for-Outlook

Outlook 용 Kutools는 Outlook 사용자의 대다수가 매일 수행해야하는 시간 소모적 인 작업에서 벗어날 수있는 강력한 추가 기능입니다! Microsoft Outlook 2019, 2016, 2013, 2010 또는 Office 365을 사용하면 시간을 절약 할 수 있습니다!

더 보기 다운로드 주문

Word 9.00 용 Kutools새로운

100 + Word의 강력한 기능

Kutools-for-Word

Word 용 Kutools는 Word 사용자 대다수가 매일 수행해야하는 시간 소모적 인 작업에서 자유롭게 해주는 강력한 추가 기능입니다. Microsoft Word / Office 2019, 2016, 2013, 2010, 2007, 2003 또는 Office 365을 사용하면 시간을 절약 할 수 있습니다!

더 보기 다운로드 주문

사무실을위한 클래식 메뉴

친숙한 메뉴 가져 오기

Office 2003의 이전 모습과 메뉴를 Microsoft Office 2019, 2016, 2013, 2010, 2007 또는 Office 365로 복원합니다. 새 리본에 명령을 찾는 데 시간을 낭비하지 마십시오. 기업 및 조직의 모든 컴퓨터에 쉽게 배포 할 수 있습니다.

더 보기 다운로드 주문

Excel에서 텍스트의 첫 번째, 마지막 X 문자 또는 특정 위치 문자를 제거하는 방법?

대부분의 Excel 사용자의 경우 텍스트 문자열의 시작 부분에서 처음 n자를 삭제하거나 아래의 스크린 샷과 같이 텍스트 문자열의 끝에서 마지막 x자를 제거해야하는 경우가 있습니다. 이 기사에서는 Excel에서이 작업을 쉽고 빠르게 해결할 수있는 유용한 트릭을 소개합니다.

doc 처음 x 문자를 제거합니다. 1


텍스트 문자열에서 첫 번째, 마지막 x 또는 특정 위치 문자를 쉽게 제거

Excel 용 Kutools's 위치 별 제거 이 기능을 사용하면 몇 번의 클릭만으로 여러 텍스트 문자열의 왼쪽, 오른쪽 또는 특정 위치에서 특정 수의 문자를 제거 할 수 있습니다. 아래 데모를 참조하십시오. Excel 용 Kutools를 다운로드하려면 클릭하십시오!


방법 1 : 수식이있는 텍스트 문자열에서 첫 x 째 또는 마지막 x 문자 제거

텍스트 문자열의 시작 부분에서 첫 x 문자를 제거하십시오.

Excel에서는 RIGHT 및 LEFT 함수를 사용하여 문자열의 처음 또는 끝에서 특정 수의 문자를 제거 할 수 있습니다. 다음과 같이하십시오.

1. 입력하거나 결과를 넣을 빈 셀 C4에 다음 수식을 복사하십시오.

= 오른쪽 (A4, LEN (A4)-2)

키를 누릅니다 엔터 버튼 키를 눌러 첫 번째 결과를 얻습니다. 스크린 샷보기 :

doc 처음 x 문자를 제거합니다. 2

주의 사항: 위 공식에서 :

  • A4 문자를 제거 할 셀 값입니다.
  • 숫자 2 는 텍스트 문자열의 시작 부분에서 제거 할 문자 수를 의미합니다.

2. 그런 다음 셀 C4을 선택하고 채우기 핸들을이 수식을 적용 할 셀로 끌어 오면 모든 첫 번째 2 문자가 텍스트 문자열에서 제거됩니다. 스크린 샷을 참조하십시오.

doc 처음 x 문자를 제거합니다. 3


텍스트 문자열의 끝에서 마지막 x 문자를 제거하십시오.

마지막 여러 문자를 제거해야하는 경우 LEFT 기능을 RIGHT 기능과 동일하게 사용할 수 있습니다.

이 수식을 공백 셀에 입력하거나 복사하십시오.

= 왼쪽 (A4, LEN (A4)-9)

이 수식을 적용 할 셀에 채우기 핸들을 드래그하고 마지막 9 문자가 텍스트 문자열에서 한 번에 삭제됩니다. 스크린 샷을 참조하십시오.

doc 처음 x 문자를 제거합니다. 4

주의 사항: 위 공식에서 :

  • A4 문자를 제거 할 셀 값입니다.
  • 숫자 9 는 텍스트 문자열의 끝에서 제거 할 문자 수를 의미합니다.

사무실 탭 그림

해고 시즌이 다가오고있어, 천천히 일하니?
-- 사무실 탭 당신의 속도를 향상시키고, 50 %의 작업 시간을 절약 해줍니다!

  • 놀랄 만한! 여러 문서의 작업은 단일 문서보다 훨씬 편안하고 편리합니다.
  • 다른 웹 브라우저와 비교하여 Office Tab의 인터페이스는 더욱 강력하고 미적입니다.
  • 자궁 경부 spondylosis와 쥐 손에 안녕을 말하고, 지루한 마우스 클릭의 수천을 감소 시키십시오;
  • 90,000 엘리트 및 300 + 유명 기업이 선택하십시오!
전체 기능, 무료 평가판 30 일 더 보기 지금 다운로드!

2 : 사용자 정의 함수를 사용하여 텍스트 문자열에서 첫 번째 또는 마지막 x 문자 제거

다음은 텍스트 문자열에서 첫 번째 또는 마지막 n 문자를 제거하는 데 도움이되는 사용자 정의 함수입니다. 다음과 같이하십시오.

텍스트 문자열의 시작 부분에서 첫 x 문자를 제거하십시오.

1. 누르고있어. Alt + F11 키를 눌러 응용 프로그램 용 Microsoft Visual Basic 창.

2. 딸깍 하는 소리 끼워 넣다 > 모듈다음 코드를 모듈 창에 붙여 넣습니다.

Public Function removeFirstx(rng As String, cnt As Long)
removeFirstx = Right(rng, Len(rng) - cnt)
End Function

3. 그런 다음 워크 시트로 돌아가서 다음 수식을 입력하십시오. = removefirstx (A4,2) 빈 셀에 넣은 다음 채우기 핸들을 아래로 끌어 필요한 결과를 얻으십시오. 스크린 샷보기 :

doc 처음 x 문자를 제거합니다. 5

주의 사항: 위 공식에서 :

  • A4 문자를 제거 할 셀입니다.
  • 숫자 2 텍스트 문자열의 시작 부분에서 제거 할 문자 수를 나타냅니다.

텍스트 문자열의 끝에서 마지막 x 문자를 제거하십시오.

텍스트 문자열에서 마지막 n 문자를 제거하려면 다음 사용자 정의 함수를 적용하십시오.

Public Function removeLastx(rng As String, cnt As Long)
removeLastx = Left(rng, Len(rng) - cnt)
End Function

그런 다음이 수식을 적용하십시오. = removelastx (A4,9) 원하는 결과를 얻으려면 스크린 샷을 참조하십시오.

doc 처음 x 문자를 제거합니다. 6

주의 사항: 위 공식에서 :

  • A4 문자를 제거 할 셀입니다.
  • 숫자 9 텍스트 문자열의 끝에서 제거 할 문자 수를 나타냅니다.

3 : 첫 x 째 x 문자 또는 수식없이 특정 위치 문자 제거

Excel 기능을 사용하여 특정 문자를 제거하는 것은 그대로있는 것은 아닙니다. 이 방법으로 제공되는 방법을 살펴보십시오. 두 번 또는 세 번의 마우스 클릭 만 있습니다. 와 더불어 위치 별 제거 타사 추가 기능 유틸리티 Excel 용 Kutools, 텍스트 문자열에서 첫 번째, 마지막 또는 특정 문자를 쉽게 제거 할 수 있습니다.

설치 후 Excel 용 Kutools적용하다 위치 별 제거 다음 단계에 따라

1. 특정 문자를 제거 할 범위를 선택하십시오. 그런 다음 Kutools > 본문 > 위치 별 제거. 스크린 샷보기 :

doc 처음 x 문자를 제거합니다. 7

2. 팝업 창에서 다음 작업을 지정하십시오. 위치 별 제거 대화 상자.

  • (1.) 삭제할 문자 수를 지정하십시오.
  • (2.) 선택 왼쪽부터 옵션 아래의 위치 첫 번째 n 문자를 삭제하는 섹션은 스크린 샷을 참조하십시오.

doc 처음 x 문자를 제거합니다. 8

팁 : 위치 별 제거 이 유틸리티는 또한 특정 위치에서 마지막 n 문자 또는 특정 문자를 제거하는 데 도움을 줄 수 있습니다.

방법 4 : 수식이있는 텍스트 문자열에서 첫 번째 x와 마지막 x 문자를 모두 제거합니다.

때로는 양면의 텍스트 문자열에서 문자를 제거하려는 경우가 있습니다. 예를 들어 첫 번째 2 문자와 마지막 9 문자를 동시에 제거해야하는 경우가 있습니다. 여기에서 MID 기능이 도움이 될 수 있습니다.

1. 이 수식을 공백 셀에 입력하거나 복사하십시오.

= MID (A4,3, LEN (A4)-11)

키를 누릅니다 엔터 버튼 키를 눌러 첫 번째 결과를 얻습니다. 스크린 샷보기 :

doc 처음 x 문자를 제거합니다. 11

주의 사항: 위 공식에서 :

  • A4 문자를 제거 할 셀 값입니다.
  • 숫자 3 왼쪽에서 제거 할 문자 수보다 하나 많습니다.
  • 숫자 11 제거 할 총 문자 수입니다.

2. 그런 다음 C4 셀을 선택하고 채우기 핸들을이 수식을 적용 할 셀로 끌어 오면 모든 첫 번째 2 및 마지막 9 문자가 텍스트 문자열에서 즉시 제거됩니다. 스크린 샷을 참조하십시오.

doc 처음 x 문자를 제거합니다. 12



Excel 용 Kutools는 대부분의 문제를 해결하고 생산성을 80 % 증가시킵니다.

  • 재사용: 빠르게 삽입 복잡한 수식, 차트 그리고 당신이 전에 사용했던 것; 셀 암호화 비밀번호로; 메일 링리스트 만들기 그리고 이메일을 보내 ...
  • 슈퍼 포뮬러 바 (여러 줄의 텍스트와 수식을 쉽게 편집); 레이아웃 읽기 (많은 셀을 쉽게 읽고 편집); 필터링 된 범위에 붙여 넣기...
  • 셀 / 행 / 열 병합 데이터 손실없이; 분할 셀 내용; 중복 행 / 열 결합... 중복 세포 방지; 범위 비교...
  • 복제 또는 고유를 선택하십시오. 행; 빈 행 선택 (모든 세포는 비어있다); 슈퍼 찾기 및 퍼지 찾기 많은 통합 문서에서; 랜덤 선택 ...
  • 정확한 사본 공식 참조를 변경하지 않는 다중 셀; 참조 자동 작성 여러 장에; 글 머리 기호 삽입, 확인란 등 ...
  • 텍스트 추출, 텍스트 추가, 위치 별 제거, 공간 제거; 페이징 소계 생성 및 인쇄; 셀 내용과 주석 간 변환...
  • 수퍼 필터 (필터 구성표를 저장하고 다른 시트에 적용); 고급 정렬 월 / 주 / 일별, 빈도 등; 특수 필터 대담하고 기울임 꼴로
  • 통합 문서와 WorkSheets 결합; 키 열을 기준으로 테이블 병합 데이터를 여러 시트로 분할; 일괄 변환 xls, xlsx 및 PDF...
  • 300 이상의 강력한 기능. Office / Excel 2007-2019 및 365를 지원합니다. 모든 언어를 지원합니다. 기업이나 조직에 쉽게 배포 할 수 있습니다. 30 일 무료 평가판 전체 기능.
kte 탭 201905

Office 탭 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, 게시자, 액세스, Visio 및 프로젝트.
  • 새 창보다는 동일한 창에서 새 탭으로 여러 문서를 열고 만들 수 있습니다.
  • 50 %만큼 생산성을 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
오피셜
Say something here...
symbols left.
You are guest ( Sign Up? )
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    Giridhar Sai Communications · 4 months ago
    Hi I have a data with names and surnames of some people, i want to separate surname in coloumn and name in another coloumn, surnames are not same like michel, john, daniel, williams like please help me to separate surname by using formula, I have lot of data
  • To post as a guest, your comment is unpublished.
    Jakub · 5 months ago
    If number or character differ you can use example below (I needed to remove the last character):
    =PART(A1;1;(LENGTH(A1)-1))
  • To post as a guest, your comment is unpublished.
    NABEEL · 7 months ago
    I WANT TO TRIM TEXT LENGTH, FOR EXAMPLE I HAVE SOME ADDRESS THAT LENGTH SOME COLUM 10 CHARECTOR AND SOME COLUM 20 CHARECTOR SOME 15 CHARECTOR IN THIS CASE I WANT TO TRIM WHICH COLUM TEXT MORE THAN 15 I WANT TO TRIM THAT COLUM TEXT TO 15 CHARECTOR, DONT TRIM OTHER COLUM TEXTS


    ANYBODY HELP ME
  • To post as a guest, your comment is unpublished.
    Dezignext Technologies · 9 months ago
    Very helpful tip. Something we use a lot in our environment.
  • To post as a guest, your comment is unpublished.
    Serkan · 10 months ago
    I gave function error when I apply formula to cell. After 2 hours I try it again by using (;) instead of (,) and result positive. As result of;
    =removelastx(E4,3) (not working)
    =removelastx(E4;3) (working)
  • To post as a guest, your comment is unpublished.
    Sameer · 1 years ago
    How to remove the first character from a cell but not in every cell in that column? Thanks!
  • To post as a guest, your comment is unpublished.
    Randy Ralston · 1 years ago
    This helped to get the result from an entry but I am unable to LOOKUP the new value.
  • To post as a guest, your comment is unpublished.
    Mohammad Barzakh · 1 years ago
    This really helps me a lot in my daily working.

    Thanks
  • To post as a guest, your comment is unpublished.
    siena · 1 years ago
    Hi,
    I have the formula that gives me the #value error that I don't seem to be able to figure out how to fix it.

    Thank you in advance.
  • To post as a guest, your comment is unpublished.
    Jesus · 1 years ago
    How can I type the command to cut text from the left and the right?
  • To post as a guest, your comment is unpublished.
    Truls Sønsteby · 1 years ago
    I can't make this formula work, I type : =LEFT(A1,LEN(A1)-4) and it gives error everytime.
    My A1 column has the following data: ELDB-AK-S-42228-001


    Why isn't this working?
  • To post as a guest, your comment is unpublished.
    Myke · 1 years ago
    i have a list of sizes that have numbers and names, words,etc. i want to remove all letters in the entire column leaving only the numbers. how do i remove all letter which come in hundreds of different variations and lengths?
  • To post as a guest, your comment is unpublished.
    Muhammad Awais Youna · 2 years ago
    Helpful, thanks
  • To post as a guest, your comment is unpublished.
    Jeremy · 2 years ago
    Hi there everyone,
    I am trying to remove an initial in a field that includes a persons name. An example is

    Taylor Jeremy D In this example I am trying to remove the D and just leave surname and first name there.

    The problem is that I have a heap of data which is inconsistently entered meaning that some of the fields have an initial (like that above) and some just say a name like Taylor Jeremy (without an initial).



    Any ideas so that I can have a consistent data set and one that excludes the initial?
    • To post as a guest, your comment is unpublished.
      Jorge · 1 years ago
      Try this, it solves exactly the way you want it.


      =IF((IFERROR((FIND(" ",A1,((FIND(" ",A1,1))+1)))/(FIND(" ",A1,((FIND(" ",A1,1))+1))),0))=1,LEFT(A1,((FIND(" ",A1,((FIND(" ",A1,1))+1)))-1)),A1)



      A1 is Taylor Jeremy D or without the D, as you wish
    • To post as a guest, your comment is unpublished.
      Jorge · 1 years ago
      Just for lettiing you know that I solved your problem, I hope im not too late.

      =SI((SIERREUR((TROUVE(" ";R9;((TROUVE(" ";R9;1))+1)))/(TROUVE(" ";R9;((TROUVE(" ";R9;1))+1)));0))=1;GAUCHE(R9;((TROUVE(" ";R9;((TROUVE(" ";R9;1))+1)))-1));R9)



      Cell R9 is your Taylor Jeremy D, try it with and without the D and you'll see it works fine
    • To post as a guest, your comment is unpublished.
      Sigma · 1 years ago
      If the text name (Taylor Jeremy D) located in A1, you can use below function to acheive the result (remove the last name):
      =LEFT(A1,FIND(" ",A1,1))&LEFT(RIGHT(A1,LEN(A1)-A2),FIND(" ",RIGHT(A1,LEN(A1)-A2))-1)
      • To post as a guest, your comment is unpublished.
        Alex B. · 1 years ago
        Can also be accomplished with the below string, which is simpler and doesn't require formulas in multiple cells. Following same assumption that data is in A1 and the initial is always 1 character. TRIM function added within the LEN function in case there are unseen trailing spaces in the data. TRIM function added at the beginning of the formula will delete any residual spacing after the LEFT function is executed.

        =TRIM(LEFT(A1,LEN(TRIM(A1))-1))

        Or if you don't like the leading TRIM function you can subtract 2 characters from the LEN function instead of just the one. I prefer TRIM route in case there are more than 1 spaces in between the name and middle initial - have to account for inconsistent data entry.

        =LEFT(A1,LEN(TRIM(A1))-2)
  • To post as a guest, your comment is unpublished.
    pejot · 2 years ago
    Hi there,
    im looking for a solution. Problem is that i have two colums of data where 1st column contain some text that part of is invalid and need to be removed, 2nd column contain invalid text string.


    Let's say cell A1 contain text string "ABCDEF"

    Cell A2 contain invalid part of the string, for example "CD"


    After removing invalid text string, cell A1 will look like this: "ABEF".

    How to do that? Thanks in advance!
    • To post as a guest, your comment is unpublished.
      Gaurav · 2 years ago
      Hey you can do this with a combination of functions:


      =CONCATENATE(LEFT(Y4;FIND("c";Y4)-1);RIGHT(Y4;LEN(Y4)-FIND("c";Y4)-1))



      Concatenate brings the two strings together, because you want to take a left side of the string and combine it with a right side of the string eliminating the middle values.
  • To post as a guest, your comment is unpublished.
    G · 2 years ago
    remove all but the characters after a certain character. =RIGHT(G2,LEN(G2)-FIND("[",G2,4)). I was doing this for states so I had to convert the state into a unique character to reduce it down to 1 character rather then " NM ".
  • To post as a guest, your comment is unpublished.
    Tumisang · 2 years ago
    Good day



    Kindly assist in removing the letters which appear like that on numbers using excel







    26772309814Trudie



    Regards
  • To post as a guest, your comment is unpublished.
    chandran k · 2 years ago
    Hai

    Ex : AS SPLSH (CW) 100ml (112)

    hove to remove last (sum numbers)
  • To post as a guest, your comment is unpublished.
    Manohar Adsule · 2 years ago
    Worked for me. Thanks
  • To post as a guest, your comment is unpublished.
    Mohamed · 2 years ago
    [b]very nice tip[/b]
  • To post as a guest, your comment is unpublished.
    thilip · 2 years ago
    Please tell me how to get particular data in a cell
    Example
    Column A
    Ip-bs-bedroom
    Gh-ff-kitchen
    Ip-gh-main door
    .
    .
    Now I want in column B has only location ,that's bedroom, kitchen so I want to remove other except location
    • To post as a guest, your comment is unpublished.
      Pratik · 2 years ago
      You can use Find and Replace (Ctr + H). Find what: "*-" and Replace with: keep this field blank. Then click replace.
  • To post as a guest, your comment is unpublished.
    Manish Gupta · 2 years ago
    Dear Member,
    How do we find
    Data Required
    201 205
    2102 2105
    203 205
    2015 2015
    207 210
    2147 2150
    1000 1000
  • To post as a guest, your comment is unpublished.
    HELPY · 2 years ago
    Hi I want to remove everything after the first dash(-) and keep only the letters.
    How do I do that?
    example 123-ABC-BDER-AKD
    • To post as a guest, your comment is unpublished.
      baba · 1 years ago
      try =RIGHT(A1, LEN(A1)-4) assuming characters before the first (-) are 3 digits long
  • To post as a guest, your comment is unpublished.
    Praveen Issac Shaji · 2 years ago
    Hi,

    I need support from Kutools team as i believe only you guys can help me. I have purchased a kutools license and couldn't find this feature in it.

    I would like to password protect/unprotect a 'sheet1' of 300 workbooks in one folder.
    For example: Only certain cells are editable in the password protected sheet1. You need to unprotect it with a password to edit all the cells.

    Scenario : When I open a workbook sheet1 opens and only certain cells are editable.(This is for on fields workers)
    For office purpose all the cells have to be editable and this is protected with a password which on field workers don't know.

    After some editing we have to protect back the sheet and save it.
    This happens for 300 workbooks' sheet1.
    So everytime

    [b]Opening workbook -> Review->Unprotect Sheet->Enter Password.[/b]
    After Changes
    [b]Review->Protect sheet->Enter Password->Save
    [/b]

    Can we do the above steps for a folder of workbooks using a VBA or any such help would be much appreciated.
  • To post as a guest, your comment is unpublished.
    Saif · 2 years ago
    I have data on browsers used by users where in I need to separate version type and names.
    Formula used by me is =LEFT(F7(MIN(FIND({0,1,2,3,4,5,6,7,8,9},F7&"0123456789")))-1). But its not working for all inputs. Data available is List of browser versions. Output needed is Group the browser versions. For example, Google Chrome 9.0, Google Chrome 9.1 and Google Chrome 9.3 should be grouped under “Google Chrome”. Version => Type: Google Chrome 9.1 => Google Chrome. Google Chrome 9.0 => Google Chrome. Google Chrome 8.0 => Google Chrome. Google Chrome 7.0 => Google Chrome. Google Chrome 6.0 => Google Chrome. Conditions are: Do not pivot the table. Need two columns – Version and Type. You can split the column but the catch is, few versions have numbers in the beginning. Eg: 360 Secure Browser
  • To post as a guest, your comment is unpublished.
    Maria · 2 years ago
    Hi!

    I Would like to removed selected characters on my excel workbook, how will i do that? is there any formulas for it?

    your immediate advice is highly appreciated.

    Thanks & BR,
  • To post as a guest, your comment is unpublished.
    Carlos · 2 years ago
    Hi.
    I would like to remove the last characters by using find and replace, but with Excel's Visual Basic (with commands).
    I would like to create a file that loads an existing file and creates a new one, with the column edited.

    Any help will be appreciated.

    Regards,
  • To post as a guest, your comment is unpublished.
    YODA · 2 years ago
    how can I mass delete a * in a excel spreadsheet description line?
    • To post as a guest, your comment is unpublished.
      Xavier · 2 years ago
      Hi Yoda,

      just do a find and replace. You can easily acces the function using CTRL+F.
      You will want to look for "*" and replace with ""
      basically, wherever excel finds * it will replace it with a blank.
  • To post as a guest, your comment is unpublished.
    N-tone · 2 years ago
    Thanks you for a very simple and a comprehensible approach. It works!!!! God bless you my dear Fellow-Anonymous!
    It took me 2 days of painful searches through Russian web and quite a number brain cells to find Excel Functions in Russian with explanatory notes provided, but all was in vain just because formulas refuse to work!! It seems like the accessibility and the total unwillingless to share common practices among my Russian colleagues, who just pretend they know *uck all about Microsoft products is still a big issue!!
    No, seriously, I owe u!
    Thanks!
  • To post as a guest, your comment is unpublished.
    narender · 3 years ago
    send the kutools for xp
  • To post as a guest, your comment is unpublished.
    Ramin Ramesh · 3 years ago
    hey tanx dears
    Replace All worked for me. hhhh very good trick..
  • To post as a guest, your comment is unpublished.
    SARPK · 3 years ago
    I want to delete the left 4 digit in whole sheet...

    for example 5895012032251........the result should be 012032251
    I can do the one only but how to do in whole worksheet..
  • To post as a guest, your comment is unpublished.
    Sachin Sawang · 3 years ago
    Hi Team,

    Need formula for removing first character from cell if it is special only.

    Kindly help...
  • To post as a guest, your comment is unpublished.
    Slamat · 3 years ago
    use subsitute function
  • To post as a guest, your comment is unpublished.
    Rao · 3 years ago
    Hi all
    Is there any way to remove Vowels from a alpha string. say 'Connector, the result supposed to be 'cnnctor'.
    • To post as a guest, your comment is unpublished.
      xavier · 3 years ago
      Hi,

      The easiest way is to do a Find and replace. Select you range, do ctrl-F then find O replace with blank. This will remove all,'O's and replace with no character, which will remove them.

      Do this with each vowel and you are done. No formula required
  • To post as a guest, your comment is unpublished.
    Lourie · 3 years ago
    Hi! Thank you so much for this article! It has saved me so much time.
  • To post as a guest, your comment is unpublished.
    Shabi · 3 years ago
    My string is like this "1400 10-07-1975"
    I want to keep only the first "1400"
    I tried, It worked for the first time with that search and replace function... but I'm unable to repeat it by putting "space*" in "find what" section
    Please help...
    • To post as a guest, your comment is unpublished.
      David · 3 years ago
      =LEFT(A1,SEARCH(" ",A1)-1) Should do the trick.
      Basically saying;
      I want text starting from the left of the string in A1, then i want to find the location of the first instance of a space and minus one from that. (otherwise your found string will contain the space).
      Simple enough, hope this helps.
  • To post as a guest, your comment is unpublished.
    Russell A · 3 years ago
    THANK GOD!!!! You just saved me two day's of work from Excel loosing all formatting. I'm going to champion this software for use within my group. You just got at least one new customer.
  • To post as a guest, your comment is unpublished.
    Indra Raj · 3 years ago
    I used this one RIGHT(B1, LEN(B1)-2)
    Thanks
  • To post as a guest, your comment is unpublished.
    CHRIS · 3 years ago
    I have data that contains both Chinese and English and I would like to trim the data so that only the English appears. The data is varying lengths and the Chinese characters I would liked trimmed are also varying lengths. How might I be able able to do this. The data looks like this:

    待摊车辆保险Prepaid vehicle insurance fee
    待摊保险费Prepaid insurance fee
    原材料Raw material
  • To post as a guest, your comment is unpublished.
    George · 3 years ago
    Hi,
    I need help with product database.

    I have names of products from database for example:
    /cars/new/car1.jpg
    /cars/car red2.jpg
    /trucks/new/for sale/34533.jpg

    So I need only the text after the last slash (jpg file name):
    car1.jpg
    car red2.jpg
    34533.jpg

    I can't predict how long it is part before slash / and after slash. It is different for different cells.

    Any solution? Thank you so much
  • To post as a guest, your comment is unpublished.
    Aks · 3 years ago
    ABC xyz pq Replace Me(s)
    output: "ABC RE"
    EFG xyz pq Change This(
    output: "EFG CT"

    I have data similar to dummy data in above 2 lines in excel. Request your help to provide a formula that will replace the complete line with "RM" if found with text "Replace Me(s)" and "CT" if found with text "Change This("
  • To post as a guest, your comment is unpublished.
    SAMULA · 3 years ago
    25/06/1994
    27/12/1984
    01/07/1991
    12/02/1977
    12/02/1977
    09/07/1976
    01/01/1974
    01/01/1974
    hello, from the above, how do i remove the first characters, i want to remain with the last 4 digits eg 1977, 1976,
    • To post as a guest, your comment is unpublished.
      manoj · 2 years ago
      =year(date)
      you can get year
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="SAMULA"]25/06/1994
      27/12/1984
      01/07/1991
      12/02/1977
      12/02/1977
      09/07/1976
      01/01/1974
      01/01/1974
      hello, from the above, how do i remove the first characters, i want to remain with the last 4 digits eg 1977, 1976,[/quote]

      Try
      =RIGHT(A1,4)
      This says;
      Starting from the right of cell A1, give me the last 4 characters.
  • To post as a guest, your comment is unpublished.
    natalie · 3 years ago
    I just want to say "thank you" for this tip; it has been EXTREMELY helpful!
  • To post as a guest, your comment is unpublished.
    Zia Ahmed · 3 years ago
    [quote name="Dave"][quote name="Michael M."]Hi!
    I have issues applying the formula for removing the first 4 characters
    =RIGHT(A1, LEN(A1)-4)
    When I insert it into Excel it opens an error window, saying that the formula is incorrect and marking =RIGHT([b]A1,[/b] LEN(A1)-4).
    Why???[/quote]
    Your code works fine for me. may be an issue with your version of excel. try putting the len(a1)-1 in brackets.
    Failing that, tr;
    =MID(A1,5,LEN(A1))
    And, obviously, make sure you are not putting this code into cell A1.
    i realise that these comments take about a month or two to get added, but i hope this helps.[/quote]
    I nomally use this type of data sq/02/16/144/g/2/10 i want all data after last slash. what i do pls. guide
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="Zia Ahmed"][quote name="Dave"][quote name="Michael M."]Hi!
      I have issues applying the formula for removing the first 4 characters
      =RIGHT(A1, LEN(A1)-4)
      When I insert it into Excel it opens an error window, saying that the formula is incorrect and marking =RIGHT([b]A1,[/b] LEN(A1)-4).
      Why???[/quote]
      Your code works fine for me. may be an issue with your version of excel. try putting the len(a1)-1 in brackets.
      Failing that, tr;
      =MID(A1,5,LEN(A1))
      And, obviously, make sure you are not putting this code into cell A1.
      i realise that these comments take about a month or two to get added, but i hope this helps.[/quote]
      I nomally use this type of data sq/02/16/144/g/2/10 i want all data after last slash. what i do pls. guide[/quote]

      try;
      =RIGHT(A1,LEN(A1)-SEARCH("^^",SUBSTITUTE(A1,"/","^^",LEN(A1)-LEN(SUBSTITUTE(A1,"/","")))))
  • To post as a guest, your comment is unpublished.
    Aman Gupta · 3 years ago
    what will the solution
    if have diffrent text in the colloum with some number whether in middle,in the beginning or in last how to remove all text in the colloum except numbers plz reply
  • To post as a guest, your comment is unpublished.
    Michael M. · 3 years ago
    Hi!
    I have issues applying the formula for removing the first 4 characters
    =RIGHT(A1, LEN(A1)-4)
    When I insert it into Excel it opens an error window, saying that the formula is incorrect and marking =RIGHT([b]A1,[/b] LEN(A1)-4).
    Why???
    • To post as a guest, your comment is unpublished.
      manoj · 2 years ago
      =mid(A1,4,len(a1))
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="Michael M."]Hi!
      I have issues applying the formula for removing the first 4 characters
      =RIGHT(A1, LEN(A1)-4)
      When I insert it into Excel it opens an error window, saying that the formula is incorrect and marking =RIGHT([b]A1,[/b] LEN(A1)-4).
      Why???[/quote]
      Your code works fine for me. may be an issue with your version of excel. try putting the len(a1)-1 in brackets.
      Failing that, tr;
      =MID(A1,5,LEN(A1))
      And, obviously, make sure you are not putting this code into cell A1.
      i realise that these comments take about a month or two to get added, but i hope this helps.
  • To post as a guest, your comment is unpublished.
    kittu · 3 years ago
    CPCB07-PV-0043-03
    I have this type of entries in 1000s.
    my task is to fill automatically, PV , in adjacent cell.
    how can I do this?
    kindly help
    • To post as a guest, your comment is unpublished.
      Xavier Daneau · 3 years ago
      your question is not clear, can you give more details?
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="kittu"]CPCB07-PV-0043-03
      I have this type of entries in 1000s.
      my task is to fill automatically, PV , in adjacent cell.
      how can I do this?
      kindly help[/quote]

      =MID(A2,(SEARCH("-",A2,1)+1),(SEARCH("-",A2,(SEARCH("-",A2,1)+1))-(SEARCH("-",A2,1)+1)))

      So, this one assumes the PV is always enclosed in "-" and that it is always after the first "-".
      It will look in cell A2, and then look for the first instance of "-" and start the copy from after that point. To find the number of characters to copy, it will look for the first "-" and then look for the second "-" and calculate the number of characters in between by subtracting the position of the second dash from the position of the first.
      Its a lot simpler than i make it sound.
      If it will always be two characters, (PV for example, you can simplify it with;
      =MID(A2,(SEARCH("-",A2,1)+1),2)
      which will look for the first instance of "-" and copy the two characters after it.

      Hope this helps.
  • To post as a guest, your comment is unpublished.
    LINZEY · 3 years ago
    Hello, how would I select information in the middle of a string?
    For example I have this: ADR292000600001200178BLOSSOMDRIVE. And I'm looking to select ONLY the 15 digits after the 'ADR'.
    I can't seem to find a way to do this.
    Thanks
    • To post as a guest, your comment is unpublished.
      Xavier Daneau · 3 years ago
      Yes, just use the MID function
      ADR292000600001 200178BLOSSOMDR IVE
      If your data is in A1 : start at the 4th char, return 15 char from that start position
      =MID(A1,4,15)
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="LINZEY"]Hello, how would I select information in the middle of a string?
      For example I have this: ADR292000600001200178BLOSSOMDRIVE. And I'm looking to select ONLY the 15 digits after the 'ADR'.
      I can't seem to find a way to do this.
      Thanks[/quote]


      =MID(A2,4,15)

      This will select the text within a string in cell A3, starting at position 4 (Assuming it always starts with ADR) and selecting only the 15 characters after "ADR" (Again assuming the information you wants is always only 15 characters long. Spaces count as characters also.)
  • To post as a guest, your comment is unpublished.
    Richie · 4 years ago
    Great info on this site as usual - I'm looking for something similar, maybe just not asking my question in the right way.

    I have a combination of the following and want to remove the numbers from each step ([b]4.[[/b]b][][/b]),([b]5.[[/b]b][][/b]) etc then (1)[]).
    Basically, I want the bottom 6 steps to look like the top 3

    Thanks in advance

    VERIFY AND CHECK
    DRAIN LUBRICANT
    REFILL WITH FRESH
    4. CHECK
    5. COMPLETE THE ATTACHED
    6. ENSURE EVERYTHING
    1) SWITCH THE FOLLOWING
    2) VISUALLY CHECK
    3) SWITCH ALARM
    • To post as a guest, your comment is unpublished.
      Dave · 3 years ago
      [quote name="Richie"]Great info on this site as usual - I'm looking for something similar, maybe just not asking my question in the right way.

      I have a combination of the following and want to remove the numbers from each step ([b]4.[[/b]b][][/b]),([b]5.[[/b]b][][/b]) etc then (1)[]).
      Basically, I want the bottom 6 steps to look like the top 3

      Thanks in advance

      VERIFY AND CHECK
      DRAIN LUBRICANT
      REFILL WITH FRESH
      4. CHECK
      5. COMPLETE THE ATTACHED
      6. ENSURE EVERYTHING
      1) SWITCH THE FOLLOWING
      2) VISUALLY CHECK
      3) SWITCH ALARM[/quote]


      =RIGHT(A2,(LEN(A2)-SEARCH(" ",A2,1)))

      Assuming your step number always has a space after it.

기능 자습서