Tip: andere talen zijn Google-Vertaald. Je kunt het English versie van deze link.
Log in
x
or
x
x
Registreren
x

or

Hoe de IF-functie te gebruiken met AND, OF en NIET in Excel?

In Excel is de ALS-functie best handig om te controleren of een cel aan een voorwaarde voldoet en verschillende waarden te retourneren op basis van geëvalueerde resultaten (Waar en Onwaar). En door de IF-functie en AND, OR, NOT-functies te combineren, zal het de omstandigheden variëren om cellen te controleren. Hier zal ik introduceren hoe IF- en AND-functies, IF- en OR-functies moeten worden gebruikt en combineer ik verschillende IF-functies in Excel.

Hoe de ALS-functie in Excel te gebruiken

Hoe te gebruiken Als functie en AND-functie in Excel

Hoe de ALS-functie en OF-functie in Excel te gebruiken

Hoe meerdere IF-functies in één formule in Excel te combineren

Combineer eenvoudig meerdere werkbladen / werkmappen / CSV-bestanden in één werkblad / werkmap

Het kan vervelend zijn om tientallen vellen uit verschillende werkmappen samen te voegen tot één werkblad. Maar met Kutools voor Excel's Combineer (werkbladen en werkmappen) hulpprogramma, u kunt het met slechts enkele klikken doen! Volledige functie Gratis proef 60-dag!

advertentie combineer vellen boeken 1


Stel dat we een verkooptabel hebben zoals de volgende schermafbeelding wordt getoond, en nu willen we de verkoopwaarden evalueren en groeperen als "ongewoon''Laag''Midden"En"hoog".

doc als en of niet 1

En kopieer nu de rijkoppen en kolomkoppen in een leeg bereik (bereik A16: E28 in ons voorbeeld) zoals de volgende schermafbeelding wordt weergegeven.

doc als en of niet 2

Tabblad Office Schakel bewerken en browsen met tabbladen in Office in en maak uw werk veel eenvoudiger ...
Kutools voor Excel - De beste Office-productiviteitstool lost de meeste van uw Excel-problemen op
  • Alles hergebruiken: Voeg de meest gebruikte of complexe formules, grafieken en al het andere toe aan uw favorieten en hergebruik ze snel in de toekomst.
  • Meer dan 20-tekstfuncties: Nummer uit tekststring halen; Een deel van de tekst extraheren of verwijderen; Nummers en valuta's omzetten in Engelse woorden ...
  • Tools samenvoegen: Meerdere werkmappen en bladen in één; Meerdere cellen / rijen / kolommen samenvoegen zonder gegevens te verliezen; Dubbele rijen en som samenvoegen ...
  • Split gereedschap: Gegevens splitsen in meerdere bladen op basis van waarde; Eén werkmap naar meerdere Excel-, PDF- of CSV-bestanden; Eén kolom naar meerdere kolommen ...
  • Plakken overslaan Verborgen / gefilterde rijen; Tel en som op achtergrondkleur; Maak een verzendlijst en Verzend e-mails op waarde van Cell...
  • Super filter: Maak geavanceerde filterschema's en pas deze toe op alle bladen; Soort per week, dag, frequentie en meer; filters door vetgedrukt, formules, commentaar ...
  • Meer dan 300 krachtige functies; Werkt met Office 2007-2019 en 365; Ondersteunt alle talen; Eenvoudig inzetbaar in bedrijf; Volledige functionaliteit 60-daagse gratis proefversie.

pijl blauwe rechterbelHoe de ALS-functie in Excel te gebruiken

De basisvorm van de ALS-functie in Excel wordt weergegeven als: = IF (logic_test, value_if true, value_if_false)

In ons geval willen we controleren of de verkoopvolumes Laag zijn of niet. Als de waarde in Cell B2 gelijk is aan of kleiner is dan 80, retourneert u de tekst "Low", als de waarde in Cell B2 groter is dan 80, wordt blanco ingevuld.

Voer de formule in = IF (B2 <= 80, "Low", "") in de cel B17 en sleep vervolgens de vulgreep naar bereik B17: E28. Zie screenshot hieronder:

doc als en of niet 3


pijl blauwe rechterbelHoe te gebruiken Als functie en AND-functie in Excel

Als u wilt controleren of een cel tegelijkertijd aan verschillende voorwaarden voldoet, kunt u de ALS-functie en de AND-functie in Excel combineren.
De basisvorm van EN-functie in Excel is = EN (Logisch 1, Logisch 2, Logisch 3, ..., etc.)

Nu willen we in ons geval controleren of een verkoopvolume meer is dan 80 en minder dan 160 tegelijkertijd, als ja de tekst "Midden" retourneert en als er geen blanco wordt geretourneerd.

Voer de formule in = IF (AND (B2> 80, B2 <160), "Middle", "") in cel B17 en sleep de vulhandgreep naar bereik B17: E28. Zie screenshot hieronder:

doc als en of niet 4


pijl blauwe rechterbelHoe de ALS-functie en OF-functie in Excel te gebruiken

Als u wilt controleren of een cel aan meerdere voorwaarden voldoet, kunt u de ALS-functie en de OF-functie in Excel combineren.

De basisvorm van OR-functie in Excel is = OF (Logisch 1, Logisch 2, Logisch 3, ..., etc.)

In ons voorbeeld willen we weten wat de ongewone verkoopvolumes zijn die groter zijn dan 180 of kleiner dan 20. Als de verkoopvolumes ongewoon zijn, retourneert u de tekst 'Ongewoon' als er geen blanco exemplaar is.

Voer de formule in = IF (OR (B2> 180, B2 <20), "Unordinary", "") in cel B17 en sleep de vulhandgreep naar bereik B17: E28. Zie screenshot hieronder:

doc als en of niet 5


pijl blauwe rechterbelHoe meerdere IF-functies te combineren in één formule in Excel

Als u in ons voorbeeld alle verkoopvolumes met één formule wilt evalueren, kunt u een complexe ALS-functie toepassen.

Als het verkoopvolume gelijk is aan of kleiner is dan 20, retourneert u de tekst 'Unordinary'; als het verkoopvolume gelijk is aan of kleiner is dan 80, retourneer dan de tekst "Laag"; indien gelijk aan of kleiner dan 160, retourneer tekst van "Middle", en indien gelijk aan of kleiner dan 200, retourneer tekst van "High".

Voer de formule in = IF (B2 <= 20, "Unordinary", IF (B2 <= 80, "Low", IF (B2 <= 160, "Middle", IF (B2 <= 200, "High", ""))) ) in cel B17 en sleep de vulhandgreep naar bereik B17: E28. Zie screenshot hieronder:

doc als en of niet 6

let op het lint Formule is te ingewikkeld om te onthouden? Sla de formule op als een Auto Text-vermelding voor hergebruik met slechts één klik in de toekomst!
Lees meer ... gratis trial

Kutools voor Excel - De beste Office-productiviteitstool Verhoog uw productiviteit met 80%

  • visfuik: Snel invoegen complexe formules, grafieken en alles wat je eerder hebt gebruikt; Coderen van cellen met wachtwoord; Maak een mailinglijst en stuur e-mails ...
  • Super Formula Bar (bewerk eenvoudig meerdere regels tekst en formule); Lay-out lezen (gemakkelijk grote aantallen cellen lezen en bewerken); Plakken op gefilterd bereik...
  • Cellen / rijen / kolommen samenvoegen zonder gegevens te verliezen; Inhoud gesplitste cellen; Combineer dubbele rijen / kolommen... voorkomen dubbele cellen; Ranges vergelijken...
  • Selecteer Dupliceren of Uniek rijen; Selecteer Lege rijen (alle cellen zijn leeg); Super Find en Fuzzy Find in veel werkboeken; Willekeurig selecteren ...
  • Exacte kopie Meerdere cellen zonder formule-referentie te wijzigen; Automatisch referenties maken naar meerdere vellen; Voeg kogels toe, Selectievakjes en meer ...
  • extract Text, Tekst toevoegen, verwijderen op positie, Verwijder de spatie; Subtotalen voor paging maken en afdrukken; Converteren tussen cellen Inhoud en opmerkingen...
  • Super filter (bewaar en pas filterschema's toe op andere bladen); Geavanceerde sortering per maand / week / dag, frequentie en meer; Speciaal filter door vet, cursief ...
  • Combineer werkmappen en werkbladen; Tabellen samenvoegen op basis van sleutelkolommen; Gegevens splitsen in meerdere bladen; Batch Converteer xls, xlsx en PDF...
  • Meer dan 300 krachtige functies. Ondersteunt Office / Excel 2007-2019 en 365. Ondersteunt alle talen. Eenvoudig te implementeren in uw onderneming of organisatie. Volledige functionaliteit 60-daagse gratis proefversie.
kte-tab 201905

Tabblad Office Brengt interface met tabbladen naar Office en maakt uw werk veel eenvoudiger

  • Bewerken en lezen met tabbladen inschakelen in Word, Excel, PowerPoint, Publisher, Access, Visio en Project.
  • Open en maak meerdere documenten in nieuwe tabbladen van hetzelfde venster, in plaats van in nieuwe vensters.
  • Verhoogt uw productiviteit met 50% en verlaagt dagelijks honderden muisklikken voor u!
Officetab onderaan
Say something here...
symbols left.
You are guest ( Sign Up? )
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    Alice · 6 months ago
    8. To be a Bunk Leader, a staff member must have over 4 service years and have completed leadership training.
    In cell L2, enter a formula using the IF and AND functions, as well as structured references to determine if Adam Moriarty can be a bunk leader.
    a. The logical test in the IF function should determine if the staff member’s Service Years is greater than 4 AND the staff member’s Leadership Training status is “Yes”. Remember to use a structured reference to the Service Years and the Leadership Training columns.
    b. The function should return the text Yes if a staff member meets both of those criteria.
    c. The function should return the text No if a staff member meets none or only one of those criteria.
    • To post as a guest, your comment is unpublished.
      kellytte · 5 months ago
      Hi Alice,
      Supposing the number of service year is placed in Cell B2, the leadership training stats is placed in Cell C2, you can use this formula =IF(AND(B2>4,C2="Yes"),"Yes","No")
  • To post as a guest, your comment is unpublished.
    Nicolae · 7 months ago
    hello!
    I need your brilliant minds to resolve a problem:
    if a1=blank & b1=blank & c1=blank & d1=blank then result1
    if a1=blank & b1=blank & c1=blank & d1>0 then result2
    if a1=blank & b1=blank & c1>0 & d1>0 then result3
    if a1=blank & b1>0 & c1>0 & d1>0 then result4
    if a1>0 & b1>0 & c1>0 & d1>0 then result5
    Can you please help me with a formula?
    i've tried with if/and, if/or but it seams i can't get a result.

    Thanks in advance!
    • To post as a guest, your comment is unpublished.
      upsss · 6 months ago
      =IF(AND(ISBLANK(A1);ISBLANK(B1);ISBLANK(C1);ISBLANK(D1));1;IF(AND(ISBLANK(A1);ISBLANK(B1);ISBLANK(C1);D1>0);2;IF(AND(ISBLANK(A1);ISBLANK(B1);C1>0;D1>0);3;IF(AND(ISBLANK(A1);B1>0;C1>0;D1>0);4;5))))
  • To post as a guest, your comment is unpublished.
    Ahmed Mosih · 7 months ago
    Need some help with logic. I wanted to check the first cell for data if it has data then it will return that cell; if it doesn't have data then it will return a different cell. But if the second cell is blank then it should return a msg. Can you please help.
  • To post as a guest, your comment is unpublished.
    Kent Durbin · 9 months ago
    IF(D15>30,"Organic Soils",IF(AND(D15>25,D15<29.99),"Clayey Soil (fine)",IF(AND(D15>20,D15<24.99),"Loamy Soil (moderately fine)",IF(AND(D15>10,D15<19.99),"Loamy Soil (medium)",IF(AND(D15>5,D15<9.99),"Loamy Soil (moderately coarse)",IF(D15<4.99,"Sandy Soil (coarse)")))))) Can you find the error?
  • To post as a guest, your comment is unpublished.
    yourname · 10 months ago
    A,b,c,d,e,f,g,a,y
  • To post as a guest, your comment is unpublished.
    dinesh · 1 years ago
    Name Amount Profit Range
    A 10,000
    B 50,000
    C 42,500
    D 75,000
    E 85,000
    F 23,500
    G 16,000
    I 57,000
    J 81,000


    Profit Range Name
    Less than 10,000 A
    10,000-20,000 B
    20,000-30,000 C
    30,0000-50,000 D
    50,0000-75,000 E
    75,000-1,00,000 F

    Write profit range in 1st table.
    any Please say how to write formula for this
  • To post as a guest, your comment is unpublished.
    mgkramarao1 · 1 years ago
    i required how to steel calculation as per dia (8,10,12,16,20,25,32) and cutting length no of bars and numbers etc

    wise in excel format
  • To post as a guest, your comment is unpublished.
    arunima · 1 years ago
    how to use if condition for condition like if value of x lying in 60-80
  • To post as a guest, your comment is unpublished.
    Matt Odom · 1 years ago
    Hello all,


    I am trying to build an IF statement to help with our Service Level calculations. We need one Queue Name to have a different time requirement than all of the other queues. I am trying to figure out how to get the formula to count all Queue Names (Column B) to show they are within our Service Level Agreement (SLA) if they are in the queue for less than 30 seconds. However, for the Queue named TS_DX_CP_ES*, I need it to show it is within SLA if less than 90 seconds.

    I currently have the following formula in place and it works for the 90 second rule but if I try to next the IF formula and change the Queue Name and Time Requirement, I get an error.


    Formula that works currently =IF(AND([@[Queue Name]]="TS_DX_CP_ES*",[@[Queue time]]<0.00104166666666667),1,0)

    Formula that gives a #VALUE! Error - =IF(AND([@[Queue Name]]="TS_DX_CP_ES*",[@[Queue time]]<0.00104166666666667),1,0),IF(AND([@[Queue Name]]="TS_PLU_US*",[@[Queue time]]<0.000358796296296296),1,0)
  • To post as a guest, your comment is unpublished.
    Matt Odom · 1 years ago
    Hello all,


    I am trying to build an IF statement to help with our Service Level calculations. We need one Queue Name to have a different time requirement than all of the other queues. I am trying to figure out how to get the formula to count all Queue Names (Column B) to show they are within our Service Level Agreement (SLA) if they are in the queue for less than 30 seconds. However, for the Queue named TS_DX_CP_ES*, I need it to show it is within SLA if less than 90 seconds.

    I currently have the following formula in place and it works for the 90 second rule but if I try to next the IF formula and change the Queue Name and Time Requirement, I get an error.


    Formula that works currently =IF(AND([@[Queue Name]]="TS_DX_CP_ES*",[@[Queue time]]<0.00104166666666667),1,0)

    Formula that gives a #VALUE! Error - =IF(AND([@[Queue Name]]="TS_DX_CP_ES*",[@[Queue time]]<0.00104166666666667),1,0),IF(AND([@[Queue Name]]="TS_PLU_US*",[@[Queue time]]<0.000358796296296296),1,0)



    Any advice or help?
  • To post as a guest, your comment is unpublished.
    Pinaki Bhattacharyya · 1 years ago
    Hi,
    I have a problem. Please help me.

    In a row, 3 columns with different value must show a different interpretation in the target cell.


    =IF(A3>0,"Welcome",IF(B3>0,"Win",IF(C3>0,"Will","HI")))



    Thanks Pinaki
    • To post as a guest, your comment is unpublished.
      kelly001 · 1 years ago
      Hi Pinaki,
      In your formula, If A3 > 0, both B3 and C3 also might be greater than 0. Similarly, when B3 > 0, both A3 and C3 also might be greater than 0.

      Normally, in the If function, you can set =IF(A3>0, "Welcome",””), which means when A3>0, returns “welcome”, while when A3 is not less than 0, returns nothing. In this function, the two condition A3>0 and A3<=0 are exclusive.

      In my example =IF(B2<=20,"Unordinary",IF(B2<=80, "Low", IF(B2<=160, "Middle", IF(B2<=200, "High", "")))), The third condition B3<=160 includes the second condition B2<=80, and the second contains the first too.
  • To post as a guest, your comment is unpublished.
    Cab · 1 years ago
    Column A has Numerical Values. Column C & D have text.

    If 2 or more separate Numerical Values in any row of Column A match then evaluate those Rows in Column C & D for any Text that doesn't match a given Text and count as 1. If Text does match then a value of 0 is assigned.


    So if..

    A1:A2 = 1

    A3:A4 = 2

    C1=Dog
    C2=Cat
    C3=Dog
    C4: Horse


    D1=Cat
    D2=Dog
    D3=Horse
    D4=Dog


    Since A1 & A2 match each other, evaluate C1,C2,D1,D2 and if any cells do not match either "Dog" or "Cat" assign a value of 1. In this example, since all cells contain either "Dog" or "Cat" a value of 0 would be assigned.

    Furthermore,

    Since A3 & A4 match each other, evaluate C3,C4,D3,D4 and if any cells do not match either "Dog" or "Cat" assign a value of 1. In this example, since cells C4 & D3 contain something other than "Dog" or "Cat" a value of 1 would be assigned.


    Thank you in advance!
  • To post as a guest, your comment is unpublished.
    jessjess · 1 years ago
    Hello,
    What would the equation for the following be?

    In cell K2 enter a formula using the IF and OR functions, as well as structured references, to determine if Adam Moriarty can be a group leader.
    a. The IF function should first determine if the staff member’s Service Years is greater than 3 OR if the staff member’s college graduate status is “Yes”. Remember to use a structured reference to the Service Years and the College Graduate columns.
    b. The function should return the text Yes if a staff member meets one or both of those criteria.
    c. The function should return the text No if a staff member meets neither of those criteria.
  • To post as a guest, your comment is unpublished.
    MUHAMMAD HARIS · 1 years ago
    i wanna know one thing that i make a table of username and password in excel and there is a third part of them is status i wanna know that if i use a formula in a third column of status using multiple "if " and "or" for the column username where i can use both of them username or phone no then i entered password and it gives in a column of status login if username or phoneno one of them is used with password if someone enter symbols in username status failed. if someone can answer me this is for email validation in excel thanks if answered
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 1 years ago
      Hi Haris,
      Could you send a screenshot about your problem?
  • To post as a guest, your comment is unpublished.
    Kiran · 1 years ago
    III
    II
    II
    II

    II
    II
    II
    II

    How can I make a formula in excel -If any one value of the column is III the result shall be displayed as III, if any value of the column is II then the result shall be displayed as II if II and III not present it shall be displayed as I
  • To post as a guest, your comment is unpublished.
    G · 1 years ago
    How would I write this into one function?


    If D26 and E26 are blank, then C26-L7
    If D26 is not blank and E26 is, then D26-L7
    If E26 is not blank, then E26-L7
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 1 years ago
      =IF(AND(D26="",E26=""),(C26-L7),IF(AND(D26<>"",E26=""),D26-L7,E26-L7))
  • To post as a guest, your comment is unpublished.
    Michelle · 1 years ago
    I am trying to write a formula to look at

    1. Is the figure either over £1000, or under -£1000

    2. Plus is the next cell over 55% or more



    so far I have =OR(M4>=1000,M4<=-1000) which pulls in the over or under £1000 plus or minus but am unsure how to add the second criteria presume its an AND(N2>=55%) but when I add it to the formula it doesnt work.
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 1 years ago
      Hi Michelle,
      Loading a screenshot can help us understand your problem and need much easier!
  • To post as a guest, your comment is unpublished.
    KJ · 1 years ago
    Hi. How can I write this as formula?

    If year is equal to current year, add 1.
    if year is previous year, add 1 OR start 1.
    if year is 2 years prior, add 1 OR start 1.
  • To post as a guest, your comment is unpublished.
    FG · 1 years ago
    Hi Everyone, I need to write a formula for the following:

    IF A1 = "BOTTOMS" AND A9 <14, then 14, otherwise A9

    OR A1 = "TOPS" AND A9 <5, then 5, otherwise A9
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 1 years ago
      Hi FG,
      You can’t create a formula to meeting one of both your conditions in Excel.
      • To post as a guest, your comment is unpublished.
        FG · 1 years ago
        Hi Kelly!

        I actually figured out a workaround!


        =ROUND((IFERROR((IF(OR(AND($I9="BOTTOMS",BL9>=$BY$3),AND($I9="TOPS",BL9>=$BY$4)),BL9,VLOOKUP($I9,$BX$3:$BY$4,2,FALSE))),0)),0)


        I9 - populates "BOTTOMS" or "TOPS" dependant on merchandise code entered
        BL9 - minimum set defined by store indice
        BY9 - minimum set defined by buyer (i.e the 14 units for bottom and and the 5 units for tops)
        BX$3:$BY$4 - vlookup to minimum set defined by buyer if if statement is false
  • To post as a guest, your comment is unpublished.
    Kim Detera · 1 years ago
    Hello! I am currently creating a template that will provide me a value depending on the score of the trainee.


    I was hoping I can add a value of 5 for any team member who gets a certain quiz %


    Here's what I'm thinking.


    5= 100%
    4= 99.9% to 90%
    3= 90% to 85%
    2= 85% to 80%
    1= <79.99


    I hope you guys can help me with the formula
  • To post as a guest, your comment is unpublished.
    Dan · 1 years ago
    Hello, I have a pretty complex formula I am trying to write and it is killing me to admit defeat on this one. So far I have:


    =IF(AND(B2="Prudential",OR(C2={"10 Year Term","15 Year Term","20 Year Term","30 Year Term"})),D2*0.75,(IF(C2="UL",D2*0.8,"0")))


    and it works just fine. However, I need to add about 37 more companies with their own commission structures to it. I am pretty sure I just need one monster OR statement with a bunch of nested IFs thrown in I just am at my wits end on figuring out exactly where to place them. Any help would be amazing. Thank you!
    • To post as a guest, your comment is unpublished.
      Anh Nguyen · 1 years ago
      Hi Dan,
      Your question is still unclear. you might to explain more by providing a solution for at least 2 companies. However, just help to shorten your OR function a bit. OR(C2={"10","15","20","30"}&" Year Term").
  • To post as a guest, your comment is unpublished.
    LINCY · 1 years ago
    =IF(OR((I2=(T2+U2),(I2=(U2+V2)),"Closed","OPEN")
    HOW TO MAKE THIS RIGHT?
  • To post as a guest, your comment is unpublished.
    Mirko Tipka · 1 years ago
    Im trying to do IF(OR(A1=1;AND(A2=1;A3=1)))
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 1 years ago
      Hi Mirko,
      Thank you for your comment. What calculation result do you want to get? Could you tell me more about your problem?
  • To post as a guest, your comment is unpublished.
    Dan Kinnefer · 2 years ago
    I'm trying to make the formula return 4 possible answer which is (R-regular,A-absent,L-late,OT-overtime). My basis for regular is if the value of the cell is "8". So this is the formula that I made so far =IF(H16>7.9,"OT",IF(H16<7.9,"L",IF(H16=8,"R","A"))). It only returns (OT and L) something is very wrong and i can't figure it out. I'm just new to excel so please help me
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 2 years ago
      Hi Dan,
      Try this formula =IF(H16=8,"R",IF(H16<7.9,"OT","L"))
  • To post as a guest, your comment is unpublished.
    Dan Kinnefer · 2 years ago
    I'm trying to make the formula return 4 possible answer which is (R-regular,A-absent,L-late,OT-overtime). My basis for regular is if the value of the cell is "8". So this is the formula that I made so far =IF(H16>7.9,"OT",IF(H16<7.9,"L",IF(H16=8,"R","A"))). It only returns (OT and L) something is very wrong and i can't figure it out. I'm just new to excel so please help me.
    • To post as a guest, your comment is unpublished.
      Anh Nguyen · 1 years ago
      Try this: =IF(OR(H16=0,H16=""),"A",IF(H16=8,"R",IF(H16<7.9,"L","OT")))
  • To post as a guest, your comment is unpublished.
    pramod · 2 years ago
    how to determine the age of the cell ? is this formula right =IF(I2<30,"future payment",AND(IF(I2>30<=45,"30-45days",AND(IF(I2>45<=60,"45-60days",AND(IF(I2>60,"61+days
    ",0)))))))
    • To post as a guest, your comment is unpublished.
      Tang Kelly · 2 years ago
      Hi pramod,
      You cannot use I2>30<=45 in formula directly. I have changed the formula for you: =IF(I2<=30,"FUTURE PAYMENT",IF(B2<=45, "30-45 DAYS", IF(B2<=45, "45-60DAYS", IF(B2<=60, "60+DAYS", ""))))
  • To post as a guest, your comment is unpublished.
    Raman V · 2 years ago
    I have charges calculation for eg. charges amount is 0 then next column should be 0. if charges is more than 1 and less than 250 then next column should be 250. If charges is more than 250 then actual charges should come in next column(252)
  • To post as a guest, your comment is unpublished.
    marhsall · 2 years ago
    how do i make this formulas talk to one another:

    =IF(OR(AND(MID(K2,6,1)="N",(MID(K2,6,1)="C"),(MID(K2,6,1)="H"),(MID(K2,6,1)="I"),(MID(K2,6,1)="B"),(MID(K2,6,1)="F"),(MID(K2,6,1)="L"),(MID(K2,6,1)="M"),(MID(K2,6,1)="P"),(MID(K2,6,1)="R"),(MID(K2,6,1)="P"),ISTEXT(G2)="61"),OR(AND(RIGHT(K2,2)=G2))),"Good","Review")

    =IF(AND(RIGHT(K2,2)=G2),"Good","Review")


    or =IF(NOT(OR(AND(MID(K2,6,1)="N",(MID(K2,6,1)="C"),(MID(K2,6,1)="H"),(MID(K2,6,1)="I"),(MID(K2,6,1)="B"),(MID(K2,6,1)="F"),(MID(K2,6,1)="L"),(MID(K2,6,1)="M"),(MID(K2,6,1)="P"),(MID(K2,6,1)="R"),(MID(K2,6,1)="P"),ISTEXT(G2)="61"),(RIGHT(K2,2)=G2))),"Good","Review")