팁 : 다른 언어는 Google 번역입니다. 방문하실 수 있습니다. English 이 링크의 버전.
로그인
x
or
x
x
회원가입
x

or

여러 체크 박스를 Excel에 빠르게 삽입하는 방법은 무엇입니까?

Excel에 여러 확인란을 신속하게 삽입하려면 어떻게해야합니까? Excel에서 다음과 같은 까다로운 방법을 따르십시오.

채우기 핸들로 여러 확인란 삽입

VBA 코드로 여러 확인란 삽입

Kutools for Excel을 사용하여 한 번의 클릭으로 여러 확인란을 삽입 및 삭제할 수 있습니다.


한 번의 클릭으로 선택 항목에 여러 개의 확인란을 삽입하십시오.

Excel 용 Kutools's 일괄 삽입 체크 박스 유틸리티를 사용하면 신속하게 여러 확인란을 한 번에 삽입 할 수 있습니다. 이 기능을 무료로 다운로드하려면 클릭하십시오.

doc 여러 개의 체크 박스 삽입 10

Excel 용 Kutools: 200 이상의 편리한 Excel 추가 기능으로 60 일 동안 아무런 제한없이 시도 할 수 있습니다. 지금 무료 평가판 다운로드 및 다운로드!


화살표 오른쪽 파란색 거품 채우기 핸들로 여러 확인란 삽입


Excel에서 Fill Handle은 많은 기능을 수행하는 강력한 기능입니다. 확인란을 채울 수도 있습니다. 먼저 체크 박스를 삽입해야합니다. 다음과 같이하십시오.

1. 딸깍 하는 소리 개발자 메뉴 막대에서 다음을 클릭하십시오. 끼워 넣다, 체크 박스 이미지를 선택하십시오. 양식 제어. 스크린 샷보기 :

doc-insert-multiple-checkboxes1

2. 확인란 이미지를 클릭하면 더하기 기호 포인터가 표시되고 추가 할 위치를 클릭하십시오.

doc-insert-multiple-checkboxes2

3. 확인란을 선택하고 셀로 이동 한 다음 확인란의 이름을 삭제합니다.

4. 그런 다음 체크 박스가있는 셀을 선택한 다음 채우려는 셀 범위 위로 채우기 핸들을 드래그합니다. 스크린 샷보기 :

doc-insert-multiple-checkboxes3


화살표 오른쪽 파란색 거품 VBA 코드로 여러 확인란 삽입

첫 번째 방법이 다소 번거롭다고 생각하면 다음 VBA 코드를 사용하면 여러 체크 박스를 쉽고 빠르게 삽입 할 수 있습니다.

1. 딸깍 하는 소리 개발자 > Visual Basic을새를 응용 프로그램 용 Microsoft Visual Basic 창이 표시되면 끼워 넣다 > 모듈, 다음 코드를 모듈:

Sub InsertCheckBoxes()
'Update 20140506
Dim Rng As Range
Dim WorkRng As Range
Dim Ws As Worksheet
On Error Resume Next
xTitleId = "KutoolsforExcel"
Set WorkRng = Application.Selection
Set WorkRng = Application.InputBox("Range", xTitleId, WorkRng.Address, Type:=8)
Set Ws = Application.ActiveSheet
Application.ScreenUpdating = False
For Each Rng In WorkRng
    With Ws.CheckBoxes.Add(Rng.Left, Rng.Top, Rng.Width, Rng.Height)
        .Characters.Text = Rng.Value
    End With
Next
WorkRng.ClearContents
WorkRng.Select
Application.ScreenUpdating = True
End Sub

2. 그런 다음 doc-multiply-calculation-3 버튼을 눌러 코드를 실행하십시오. 확인란을 삽입 할 셀 범위를 선택하라는 메시지 상자가 나타납니다. 스크린 샷보기 :

doc-insert-multiple-checkboxes4

3. 그런 다음 OK체크 박스가 깔끔하고 아름답게 삽입되었습니다. 스크린 샷보기 :

doc-insert-multiple-checkboxes5


화살표 오른쪽 파란색 거품 Excel 용 Kutools에 여러 확인란 삽입

여기서는 여러 확인란을 삽입하는 쉽고 편리한 방법을 소개합니다.Excel 용 Kutools그와 배치 삽입 확인란 기능을 사용하면 데이터가있는 빈 셀이나 셀에 확인란을 삽입 할 수 있습니다.

Excel 용 Kutools : 300 이상의 편리한 Excel 추가 기능으로 60 일 동안 아무런 제한없이 시도 할 수 있습니다..

설치 후 Excel 용 Kutools다음 단계를 따르십시오.

1. 확인란을 삽입 할 셀 범위를 선택하십시오.

2. 딸깍 하는 소리 Kutools > 끼워 넣다 > 일괄 삽입 체크 박스, 스크린 샷보기 :

doc-insert-multiple-checkboxes06

3. 그런 다음 선택한 셀이 다음 스크린 샷과 같이 확인란으로 채워집니다.

빈 셀에 체크 박스 삽입 데이터 셀에 체크 박스 삽입
doc-insert-multiple-checkboxes7 doc-insert-multiple-checkboxes8

팁. 여러 확인란을 신속하게 삭제하려면 Excel 용 Kutools확인란 삭제 다음 스크린 샷과 같습니다. 제한없이 60 일 동안 완전한 기능입니다. 무료 평가판을 다운로드하여 지금 사용해보십시오..

doc-insert-multiple-checkboxes9

Excel 용 Kutools: 200 이상의 편리한 Excel 추가 기능으로 60 일 동안 아무런 제한없이 시도 할 수 있습니다. 지금 무료 평가판 다운로드 및 다운로드!


화살표 오른쪽 파란색 거품 Excel 용 Kutools로 여러 확인란을 삽입하고 삭제하십시오.

Excel 용 Kutools: 200 이상의 편리한 Excel 추가 기능으로 60 일 동안 아무런 제한없이 시도 할 수 있습니다. 지금 무료 평가판 다운로드 및 다운로드!


관련 기사 :

Excel에서 여러 확인란을 빠르게 삭제하는 방법은 무엇입니까?


Excel 용 Kutools는 대부분의 문제를 해결하고 생산성을 80 % 증가시킵니다.

  • 재사용: 빠르게 삽입 복잡한 수식, 차트 그리고 당신이 전에 사용했던 것; 셀 암호화 비밀번호로; 메일 링리스트 만들기 그리고 이메일을 보내 ...
  • 슈퍼 포뮬러 바 (여러 줄의 텍스트와 수식을 쉽게 편집); 레이아웃 읽기 (많은 셀을 쉽게 읽고 편집); 필터링 된 범위에 붙여 넣기...
  • 셀 / 행 / 열 병합 데이터 손실없이; 분할 셀 내용; 중복 행 / 열 결합... 중복 세포 방지; 범위 비교...
  • 복제 또는 고유를 선택하십시오. 행; 빈 행 선택 (모든 세포는 비어있다); 슈퍼 찾기 및 퍼지 찾기 많은 통합 문서에서; 랜덤 선택 ...
  • 정확한 사본 공식 참조를 변경하지 않는 다중 셀; 참조 자동 작성 여러 장에; 글 머리 기호 삽입, 확인란 등 ...
  • 텍스트 추출, 텍스트 추가, 위치 별 제거, 공간 제거; 페이징 소계 생성 및 인쇄; 셀 내용과 주석 간 변환...
  • 수퍼 필터 (필터 구성표를 저장하고 다른 시트에 적용); 고급 정렬 월 / 주 / 일별, 빈도 등; 특수 필터 대담하고 기울임 꼴로
  • 통합 문서와 WorkSheets 결합; 키 열을 기준으로 테이블 병합 데이터를 여러 시트로 분할; 일괄 변환 xls, xlsx 및 PDF...
  • 300 이상의 강력한 기능. Office / Excel 2007-2019 및 365를 지원합니다. 모든 언어를 지원합니다. 기업이나 조직에 쉽게 배포 할 수 있습니다. 30 일 무료 평가판 전체 기능.
kte 탭 201905

Office 탭 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, 게시자, 액세스, Visio 및 프로젝트.
  • 새 창보다는 동일한 창에서 새 탭으로 여러 문서를 열고 만들 수 있습니다.
  • 50 %만큼 생산성을 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
오피셜
Say something here...
symbols left.
You are guest ( Sign Up? )
or post as a guest, but your post won't be published automatically.
Loading comment... The comment will be refreshed after 00:00.
  • To post as a guest, your comment is unpublished.
    Rohit · 11 months ago
    Thanks for the tips, could help me , I am trying to select multiple checkboxes and based on selection count should be displayed. could help me with macro code for same
  • To post as a guest, your comment is unpublished.
    Wayne Edmondson · 11 months ago
    Hello and thank you for the tips above. Note that in your Sub, you must declare the variable xTitleId with Dim xTitleId as String.. otherwise the routine will produce an error, assuming the user has VBA set with Option Explicit. The Dim above solves the problem and the Sub works perfectly thereafter. Thanks for the great advice and information.
  • To post as a guest, your comment is unpublished.
    Tianao Li · 2 years ago
    Great macro, gracefully written!!! Thank you!
  • To post as a guest, your comment is unpublished.
    Jeff · 2 years ago
    I just purchased the program. When I insert the checkboxes, they are slightly lower than the cell itself, so they are encroaching into the cell below. How can I reposition each of those cells?
  • To post as a guest, your comment is unpublished.
    Nesh · 3 years ago
    Hye there. im new here n new for using excel.can i know how to put other excel sheet under one excel sheet. example when i open 1 excel sheet and i got my audit plan. Then i got list of country overall such as Canada and Belgium. So what i wan to know how if i click Canada and my audit plan for Canada will appear.
  • To post as a guest, your comment is unpublished.
    Ruby Lee · 4 years ago
    Why is my name in this list? I did not take this class.
  • To post as a guest, your comment is unpublished.
    sam · 4 years ago
    Hi Just followed your code to create a list of checkboxes on my spreadsheet, I am very new to this but have managed to follow it and worked perfectly. I just cant remove the checkbox labels coming up? i have a pretty long spreadsheet and deleting them individually is impossible. can i remove the labels that come up with each checkbox??? please help
  • To post as a guest, your comment is unpublished.
    Matthew · 4 years ago
    Really good macro

    How do insert them already checked? i.e. their value is already 1?
    Thanks
  • To post as a guest, your comment is unpublished.
    Kamolga · 4 years ago
    THANK YOU!!! Great post!
  • To post as a guest, your comment is unpublished.
    LLD · 4 years ago
    Hello, this macro is a GREAT timesaver - thank you! I'm terrible with VBA, but I was trying to determine which line(s) in the code I may be able to comment to keep the range-reminder dialog from appearing. Is that possible?

    I'm prepping some checklists for our marketing group and entering a MILLION checkboxes (so you can imagine how much this macro helps), but I have to stop with each group/range and click on that darn dialog.

    Any way to disable it so I can maybe re-enable it later? Thanks for any help! -LLD
  • To post as a guest, your comment is unpublished.
    JeffFromTims · 4 years ago
    I'm attempting to make a call log (in a table format) that has check boxes. I want to be able to sort/filter the table and have the check boxes move accordingly with the other data. At the moment, they're fixed.
  • To post as a guest, your comment is unpublished.
    TipTup21 · 4 years ago
    Great Post!

    Is there a Way to do the VBA Code with toggle buttons?
  • To post as a guest, your comment is unpublished.
    Jessica · 5 years ago
    :-) Hello,
    Thanks for the tips! I was wondering, is there another simple way to insert checkboxes into the actual cell..vs floating?
    Also, can you insert...
    -as a dropdown field - categorizable (is that even a word? ;/)
    -in the cell - so you can format alignment

    thanks!
  • To post as a guest, your comment is unpublished.
    Brian · 5 years ago
    I have an xml mapped excel spreadsheet where a user copies and pastes a number of rows then we can export to an xml file. I would like to add a column with check boxes and have the user check appropriately then have that field export as true/false to xml. Any idea how this could be accomplished?
    • To post as a guest, your comment is unpublished.
      Kman · 5 years ago
      If I understand you correctly you have an xml mapped excel file that is intended for users to copy and paste into. Then the user users the XML Export tool to create a second file that is an XML file that is then used in another process.

      Well if you have the excel file with cells mapped you could have the check boxes setup in the file ahead of time. The checkboxes can be placed on cells that are mapped. The checkboxes insert True/False into the cells they are linked to or turn empty or to a check mark depending on what is entered into the cell. If a user pastes values into those cells the checkbox won't be affected unless that pasted value is "True" or "1". You can have the user either paste values or use the checkboxes to enter TRUE/FALSE. Once the user has gotten the excel file the way they want they can then export to XML.
  • To post as a guest, your comment is unpublished.
    Ed · 5 years ago
    [quote name="MikeC"][quote name="Danny"]Yes. Yes, there is.
    There is always a way.[/quote]

    OK. How would I accomplish this. I am not well versed in excel syntax. I have tried .text and .value (for c in the above code). With incorrect results. I have tried a myriad of things that would normally be the result but no luck.
    What I have is a large bullet list of items that I would like to [quote name="MikeC"][quote name="Danny"]Yes. Yes, there is.
    There is always a way.[/quote]

    OK. How would I accomplish this. I am not well versed in excel syntax. I have tried .text and .value (for c in the above code). With incorrect results. I have tried a myriad of things that would normally be the result but no luck.
    What I have is a large bullet list of items that I would like to replace the bullet with a check box and have the value and text of that box be the original text of the bullet item[/quote]
    replace the bullet with a check box and have the value and text of that box be the original text of the bullet item[/quote]

    Original code, plus it takes the list that is in the cells and uses that as the text for the check box
    Sub AddCheckBoxes()
    On Error Resume Next
    Dim c As Range, myRange As Range, Text As String
    Set myRange = Selection
    For Each c In myRange.Cells
    BoxLabel = c.Value '
  • To post as a guest, your comment is unpublished.
    Jennebeth Monserat · 5 years ago
    it really helped a lot. thank to you!
  • To post as a guest, your comment is unpublished.
    Ali Mac · 5 years ago
    hi,

    this macro works beautifully for me. i needed a little favour - i would like to ensure that the checkboxes are placed bang in the centre of the cell. can someone please help?

    best regards.
  • To post as a guest, your comment is unpublished.
    Ali Mac · 5 years ago
    hi,

    would you be able to help with one small tweak to your code, which is working just great for me otherwise?

    i would like the cell to be exactly centered within the cell housing it.

    thanks and regards.
    • To post as a guest, your comment is unpublished.
      Jackeroo · 2 years ago
      [quote name="Ali Mac"]hi,

      would you be able to help with one small tweak to your code, which is working just great for me otherwise?

      i would like the cell to be exactly centered within the cell housing it.

      thanks and regards.[/quote]

      For Each Rng In WorkRng
      With Ws.CheckBoxes.Add((Rng.Offset(0, 1).Left - Rng.Left) / 2 + Rng.Left - 8, Rng.Top, 0.33, Rng.Height)
      .Characters.Text = Rng.Value
      End With
  • To post as a guest, your comment is unpublished.
    Cole · 5 years ago
    Hey, I found this and it works great, but im using it for a daily checklist and i put rows, and when i check one box (i.e. in row 3) all check boxes in that row are checked.

    Is there a way to make each check box individual/independent?
    • To post as a guest, your comment is unpublished.
      Kman · 5 years ago
      You need to either delete those check boxes that are linked and re-create them with the macro or you can try the code I posted earlier that resets the link between cells and check boxes.
  • To post as a guest, your comment is unpublished.
    xyz · 5 years ago
    The code worked great. Thank you!
  • To post as a guest, your comment is unpublished.
    Kman · 5 years ago
    Sub RelinkCheckBoxes()
    'You select cells that include the checkboxes that are acting weird.
    'Then you run the macro.
    'It changes those checkboxes so that the linked cells correspond to the cells underneath.
    'Also it makes the checkbox text turn into the cell text.

    Dim ckbox As Shape
    Dim rngLinkedCell As Range

    If ActiveSheet.CheckBoxes.Count = 0 Then Exit Sub

    'Test that selection is a range.
    If TypeName(Selection) "Range" Then Exit Sub


    For Each ckbox In ActiveSheet.Shapes
    'Test that the shape is a control.
    If ckbox.Type = msoFormControl Then
    'test that the control is a checkbox
    If ckbox.FormControlType = xlCheckBox Then
    'find the cell under the checkbox that is within the selection
    Set rngLinkedCell = Application.Intersect(ckbox.TopLeftCell, Selection)
    'assign a new link address and rename the checkbox to match.
    If Not rngLinkedCell Is Nothing Then
    With ckbox
    .OLEFormat.Object.LinkedCell = rngLinkedCell.Address
    .Name = rngLinkedCell.Address
    .TextFrame.Characters.Text = rngLinkedCell.Text
    End With
    End If
    End If
    End If
    Next
  • To post as a guest, your comment is unpublished.
    FAISAL · 5 years ago
    how to change cell address
  • To post as a guest, your comment is unpublished.
    Reuben · 5 years ago
    I have a excel spreadsheet that has a question and then to the right are other columns "Controls Met, column f and G with check boxes that have been check, column F yes or column G no. I only want to use the filter to get each of the rolls that have a check mark, but the filter does not see s check mark
  • To post as a guest, your comment is unpublished.
    Meg · 5 years ago
    Hey guys, this is so helpful - thanks! Quick question, I'm completely inexperienced with this type of stuff so sorry if it's a stupid one! I would like to just have tick boxes (without the true or false) and I would like the boxes to be yellow when not ticked but have no fill once ticked, to indicate students who have not handed in drafts and assessment, etc. Is this possible? Could someone please post the actual code for this, or walk me through it? Many thanks in advance!!!
    • To post as a guest, your comment is unpublished.
      FAISAL · 5 years ago
      how to change the reference address for multiple checkboxes
  • To post as a guest, your comment is unpublished.
    MikeC · 5 years ago
    Is there a way to have the checkbox text be the text of the selected cell?
    • To post as a guest, your comment is unpublished.
      Danny · 5 years ago
      Yes. Yes, there is.
      There is always a way.
      • To post as a guest, your comment is unpublished.
        MikeC · 5 years ago
        [quote name="Danny"]Yes. Yes, there is.
        There is always a way.[/quote]

        OK. How would I accomplish this. I am not well versed in excel syntax. I have tried .text and .value (for c in the above code). With incorrect results. I have tried a myriad of things that would normally be the result but no luck.
        What I have is a large bullet list of items that I would like to replace the bullet with a check box and have the value and text of that box be the original text of the bullet item
  • To post as a guest, your comment is unpublished.
    Ejaz-Ul-Haque · 5 years ago
    Thanks a lot!,
    for check box.
  • To post as a guest, your comment is unpublished.
    Priyanka · 5 years ago
    Can we then filter those check boxes? Basically display only those who attended?
    • To post as a guest, your comment is unpublished.
      Kman · 5 years ago
      Yeah totally. The checkboxes are actually independent of the cells. They basically float over the spreadsheet and are linked to a cell by address inserting True and False values when clicked (or N/A if you make it a three-state checkbox).

      But when you filter in excel it hides specific rows. It will not hide the check boxes. I really don't suggest filtering with this macro. Strange things will happen and you might not realize when there are several check boxes sitting on top of each other or that two check boxes are linked to one cell and a cell is linked to no checkboxes.

      What I usually do is I will create a list and instead of checkmarks I will type a 1 or a 0 into the adjacent cell and then total. You can even pivot table the thing if your information gets complicated. For instance say you had another column that had the gender of your attendees. You could figure out how many men and how many women attended.
  • To post as a guest, your comment is unpublished.
    Priyanka · 5 years ago
    Can we then filter on those check boxes? Basically display only those who attended?
  • To post as a guest, your comment is unpublished.
    Kman · 5 years ago
    The check boxes go a bit nuts when you copy them with their linked cells. I had to write a thing to reset the linking for when I want to copy those cells somewhere else.
  • To post as a guest, your comment is unpublished.
    CM_Mario · 5 years ago
    It keeps giving me an error when I open it that it had to fix errors? Any assistance? If someone would like to help I will post the report that I'm getting from Microsoft office.
  • To post as a guest, your comment is unpublished.
    Violet · 5 years ago
    The code works great! I edit the color now I'd like to center the checkboxes in each cell, any idea what I would need to modify for that? Thanks!
    • To post as a guest, your comment is unpublished.
      Jackeroo · 2 years ago
      [quote name="Violet"]The code works great! I edit the color now I'd like to center the checkboxes in each cell, any idea what I would need to modify for that? Thanks![/quote]
      For Each Rng In WorkRng
      With Ws.CheckBoxes.Add((Rng.Offset(0, 1).Left - Rng.Left) / 2 + Rng.Left - CkBoxSize, Rng.Top, 0.33, Rng.Height)
      .Characters.Text = Rng.Value
      End With
  • To post as a guest, your comment is unpublished.
    Lior · 5 years ago
    I did it but when I check one boc, all are being checked together. how can I separate them?
  • To post as a guest, your comment is unpublished.
    # Sean · 5 years ago
    When I did this, everything worked great (Thank you!) except when the boxes are checked, it automatically has a yellow fill color in the cell. How do I make it to where the only thing that happens is the box is checked, no fill color?

    Thanks!
    • To post as a guest, your comment is unpublished.
      Dennis · 5 years ago
      [quote name="# Sean"]When I did this, everything worked great (Thank you!) except when the boxes are checked, it automatically has a yellow fill color in the cell. How do I make it to where the only thing that happens is the box is checked, no fill color?

      Thanks![/quote]


      Just change the line like it says in the comments:

      .FormatConditions(1).Interior.ColorIndex = 6 'change for other color when ticked

      Leave it out completely if you don't want a color change.

      Cheers!
  • To post as a guest, your comment is unpublished.
    O · 5 years ago
    AWESOME! Thank you so much!
  • To post as a guest, your comment is unpublished.
    Suleman · 5 years ago
    Excellent work. Thank you :roll:
  • To post as a guest, your comment is unpublished.
    Jack · 5 years ago
    excellent macro works add checkbox in the cell, thank u :-)
  • To post as a guest, your comment is unpublished.
    Daniel · 6 years ago
    Why is there only one boy in this class????
    • To post as a guest, your comment is unpublished.
      Jay Chivo · 6 years ago
      [quote name="Daniel"]Why is there only one boy in this class????[/quote]
      :lol: That's just for demonstration.
  • To post as a guest, your comment is unpublished.
    Prem Gurung · 6 years ago
    Great trick... I enjoyed it.
  • To post as a guest, your comment is unpublished.
    Jamie · 6 years ago
    Excellent macro that works beautifully to quickly and easily insert check boxes into a selected range; thank you.

    Would you consider showing an example of a macro to insert in a selected range a customized drop down list with three options: "Yes", "No", and "Maybe"?